馬隆龍 劉琪英

摘 要：該研究針對第三個關鍵科學問題“解聚產物催化轉化制備先進液體燃料的機理及產物選擇性控制規律”開展基礎性研究工作。在糖類衍生物水相催化制液體烷烴燃料的反應機理、產物控制規律研究和相關高效催化劑體系設計等方面進行了探索。針對糖類衍生物水相催化合成HMF，發展了高效的類微乳反應體系和NaHSO4-ZnSO4催化劑體系，可有效避免副產物生成和HMF的進一步降解，獲得高達57%的HMF收率。發展MOFs內嵌雜多酸和Ru粒子的高效催化劑，通過金屬與酸的功能匹配，實現了纖維素等一步轉化為山梨醇，山梨醇收率達到58%。制備了Ni基金屬-酸雙功能催化劑應用于山梨醇/木糖醇轉化為C5/C6烷烴，通過金屬組分、載體等的調控作用和反應機理研究，實現C5/C6烷烴產物的定向催化合成，收率超過90%。針對糠醛與丙酮的縮合反應，設計合成了高效MgO/NaY固體堿催化劑，堿性質及MgO與NaY的協同催化作用可有效活化糠醛與丙酮分子，加快反應速率，獲得高達98%的C8-C15縮合產物，設計合成了Pt/SiO2-ZrO2催化劑，通過調控催化劑的組成結構和產物加氫脫氧路徑分析，獲得收率達到70%的C8-C15烷烴產物，催化劑連續運行120 h不失活，具有較好的穩定性。針對酚類衍生物催化制備液體烷烴燃料，設計合成了離子液共聚物負載的Ru催化劑，通過離子液共聚物穩定Ru納米粒子的金屬-酸雙功能的協同催化作用（金屬中心的C-C鍵加氫飽和，酸中心的C-O斷裂），實現了苯酚及其衍生加氫脫氧高效轉化為液體烷烴。針對苯酚選擇性加氫制環己酮，設計合成了高效的聚苯胺修飾碳納米管負載Pd催化劑，通過聚苯胺修飾碳納米管的電子調控對苯酚及其衍生物的選擇性吸附和Pd活性組分的協同加氫作用，實現了苯酚及其衍生物定向轉化為環己酮衍生物，環己酮收率高達99%。在上述研究基礎上，我們率先在國內建立了年產150噸規模的生物汽油驗證研究系統。

關鍵詞：糖 水相催化 液體烷烴 基礎研究

Abstract：Aiming to the third key scientific issue “transformation route and mechanism for advanced liquid fuel production from decomposed products by aqueous phase catalysis” of the project， we used sugar derivatives as the feedstock to synthesize liquid C5/C6 and C8-C15 alkanes with the emphasis on the reaction mechanism and goal products controlling methods， and relative catalysts designation. For biomass derived HMF platform， we developed the highly efficient analogue micro-emulsion reaction system and NaHSO4-ZnSO4 combined catalyst， which obtained the HMF yield of 57%. For one-step conversion of cellulose to sorbitol， we fabricated highly active MOFs encapsulated heteropolyacid and Ru nanoparticle as the catalyst and the 58% of sorbitol yield could be observed by mediating the acid-metal balance in the catalyst. We synthesized the efficient Ni based bi-functional catalysts for sorbtiol/xylitol conversion to C5/C6 alkanes. By choosing metal， support and their assembly together with the investigation on the hydrodeoxygenation （HDO） mechanism， more than 90% of C5/C6 alkanes yield could be obtained. For jet fuel with the carbon chain length of C8-C15 alkanes， we designed MgO/NaY for C-C bond coupling in furfural and acetone. The synergistic effect of MgO and NaY activated the α-H in acetone and carbonyl group in furfural， which accelerates the condensation rate and obtains the C8-C15 condensation products yield of more than 98%. To achieve production of C8-C15 alkanes， we used Pt/SiO2-ZrO2 for HDO of C8-C15 condensation products. Due to the weak acidity of the catalyst and high C-O bond cracking property of Pt， the catalyst possessed 70% of goal products yield and showed the excellent catalytic stability of more than 120 h. For phenol derivatives conversion to liquid alkane fuel， we fabricated Ru supported on ionic liquid contained copolymer as the catalyst. By using the cooperative effect between the Ru catalyzed C=C bond saturation and acid catalyzed C-O bond cracking. For selective hydrogenation of phenol to cyclopentanone， we synthesized Pd supported carbon nanotube modified with polyaniline. Due to the selective adsorption phenol on polyaniline and hydrogenation on Pd， more than 99% of cyclopentanone could be obtained. Based on the mentioned investigation， we built up a pilot scaled facility of 150t/a for bio-gasoline production for the first time in China， which demonstrated a platform for practical production of bio-fuel on a large scale.

Key Words：Sugar；Aqueous phase catalysis；Liquid alkane；Basic research

閱讀全文鏈接（需實名注冊）：http：//www.nstrs.cn/xiangxiBG.aspx？id=49165&flag=1