篇 名作者 卷（期）：頁

Cu含量對噴射成形7055鋁合金微觀組織和力學性能的影響······················································································陸正萍 ,張楨 ,蔣云澤 39（1）： 1

Mg-7Gd-3Y-1Nd-2Zn-0.5Zr合金高溫?zé)嶙冃涡袨檠芯俊ぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁぁだ?蒙 ,王 新 ,張永強 ,王 儉 ,徐 哲 ,張平輝 39（1）： 6

納米Al2O3顆粒對Cu-Al2O3性能的影響········································································陳 渝 ,屠曉倩 ,王柳幸 ,付亞波 39（1）： 15

Al2O3/WO3/ZrO2催化劑的制備及在酯交換反應中的研究········································································何 垚 ,文振中 ,楊 丹 ,孟志強 39（1）： 19

ZnO/Bi2WO6異質結的制備及光催化制氫研究······························································································司夢銀 ,崔立峰 39（1）： 25

316L不銹鋼與CaSiO3復合材料選擇性激光熔化制備工藝····························································馬錚杰 ,任 燦 ,嚴 彪 ,王聯鳳 ,程靈鈺 39（1）： 31

Al-Zn-Mg-Cu系鋁合金微合金化的研究進展···················································································劉懿芳 ,田 偉 ,孫 玥 39（1）： 38

CO2催化重整生物質焦油金屬催化劑的研究進展·················································蔡 晴 ,張瑞新 ,王燕剛 ,康詩飛 ,左元慧 ,崔立峰 39（1）： 42

鋰離子電池硅/碳負極材料的制備與應用········································································劉旭燕 ,朱新杰 ,陸友才 ,潘 登 39（1）： 49

有機朗肯循環系統研究綜述········································································黃雅婷 ,陶樂仁 ,黃理浩 ,喬家廣 39（1）： 57

混合導電材料電導率的測試方法研究····························································魏麗酈 ,劉雪琪 ,童雨竹 ,袁夢輝 ,董文靜 39（2）： 1

Mo對650 ℃高溫鈦合金組織和性能的影響······································郭佳林 ,董燕妮 ,岳 旭 ,陳秉剛 ,王鼎春 ,劉建榮 ,王清江 39（2）： 6

工藝參數對鋁合金微齒輪熱擠壓成形的影響········································································陳澤中 ,程志龍 ,李雪源 ,趙 娜 39（2）： 12

Al,K和Si對鉬粉還原及燒結過程的影響·················································卜春陽 ,李文虎 ,劉博洲 ,董洪峰 ,王 娜 ,莊 飛 39（2）： 18

POSS功能化鑭系稀土配合物雜化材料的制備與表征······························································································胡 皓 ,李 穎 39（2）： 23

石墨相氮化碳表面包覆改善鋰離子電池正極材料LiCoO2電化學性能的研究·················································毛立浩 ,薛亞楠 ,周云龍 ,左元慧 ,康詩飛 ,崔立峰 39（2）： 28

Y含量對Mg-Zn-Y非晶合金性能的影響····························································任 帥 ,何美鳳 ,王 浩 ,潘 登 ,周錕廣 39（2）： 35

熱交換器翅片用親水鋁箔預處理工藝控制·········································································································李高林 39（2）： 42

碳膜材料的熱學性能及研究進展········································································邱漢迅 ,閆廷龍 ,李幸娟 ,楊俊和 39（2）： 46

韓國POSCO公司的鎂業務進展·········································································································羅 曄 39（2）： 56

架空電力線路用導體材料的研究現狀和發展方向··········································································································黃崇祺 39（3）： 1

生物醫用開孔泡沫鋅的制備及力學性能·····························································祖國胤 ,李志剛 ,胡 磊 ,黃 鵬 ,穆永亮 39（3）：11

多主元FeNiMnCr0.75Alx高熵合金微觀結構和力學性能的研究·······························································································張威威 ,李榮斌 39（3）：18

共價有機多孔稀土雜化材料的制備與性能····················································································梁亞東 ,李 穎 ,王 霞 39（3）：23

淬火方式對薄壁軸承套圈變形的影響········································································馮紀偉 ,王智勇 ,王秉楠 ,李 錚 39（3）：28

軋制工藝和退火溫度對TC4ELI鈦合金厚板顯微組織的影響··················································王 儉 ,李有華 ,李 蒙 ,王勤波 ,王 新 ,張永強 39（3）：32

焊接工藝對鎳基焊縫氣孔的影響·······························································································趙曉兵 ,魯艷紅 39（3）：36

基于微波法快速合成短棒狀SBA-15的探析········································································沈 蔚 ,洪周琴 ,羅 超 ,何丹農 39（3）：43

ENYA貼片機提升產能的設備改造·······························································································孫啟偉 ,孟慶輝 39（3）：48

鎂基非晶合金作為生物材料的應用現狀····················································································談?wù)?,戚孝群 ,趙一鶴 39（3）：53

PDP用壓延銅箔表面黑化處理研究進展·····························································張 寧 ,劉新寬 ,劉 平 ,江幼平 ,黎曉桃 39（3）：59

GH105合金元素含量對析出相的影響·····························································沈祎舜 ,姚志浩 ,陳筱菲 ,董建新 ,江 河 39（4）： 1

Cu/Ni3Ti原位復合材料的顯微組織和力學性能··················································毛 虎 ,楊宏亮 ,張 正 ,姜 江 ,李永濤 ,史曉斌 39（4）：10

Al-6.6Zn-1.7Mg-0.26Cu合金擠壓材焊接接頭的組織與性能·····························································張 會 ,劉 磊 ,周 楠 ,羅明強 ,胡 權 39（4）：16

硼粉粒度對Li-B合金結構及熱穩定性的影響·······························································································朱 琳 ,盧 丫 39（4）：21

堿土金屬碳酸鹽催化乙醇胺-CO2反應機理研究····················································································周云龍 ,崔立峰 ,史煥聰 39（4）：25

模板法制備La2O3-CexZr1-xO2催化酯交換反應的研究········································································孟志強 ,文振中 ,陳 凱 ,何 垚 39（4）：32

雙氧水還原浸出非洲氧化銅鈷礦的試驗研究·····························································梁偉華 ,鄭世林 ,吳理覺 ,文定強 ,付海闊 39（4）：38

鋁合金導體應用發展歷程及現狀··········································································································吳振江 39（4）：42

航空航天緊固件用鈦合金材料綜述··················································李 蒙 ,鳳偉中 ,關 蕾 ,王 新 ,張永強 ,王 儉 39（4）：49

鎂基非晶合金的研究進展··················································付振闖 ,李 強 ,常春濤 ,劉 芳 ,王新敏 ,潘 登 39（4）：54

無鉛易切削黃銅的發展現狀及發展方向·······································張瀚巍 ,劉 平 ,劉新寬 ,馬鳳倉 ,李 偉 ,何代華 ,陳小紅 39（4）：58

C含量對一種單晶高溫合金組織和持久性能的影響·····················································································史振學，劉世忠，趙金乾 39（5）： 1

TaAgN復合膜顯微結構、力學性能和摩擦性能的研究·····················································································黃 婷，喻利花，許俊華 39（5）： 7

Ni-W-Co三元合金鍍層電鍍工藝的研究···········································································王露露，劉新寬，王 琪，劉 平 39（5）：13

熱處理對釬焊鋁箔翅片料抗下垂性能的影響·····················································································靳丹萍，劉歡歡，趙 杰 39（5）：19

Ca和Sn對提升機控制手柄用Mg-Al-Zn-Si合金性能的影響······················································趙瑞峰，安 琴，張清正，張 永，石桂林，李 峰 39（5）：24

交叉軋制對TA1鈦箔材組織和性能的影響································································李 蒙，關 蕾，鳳偉中，王 新，張永強 39（5）：28

高抗力金屬板帶材多輥冷軋機特點分析································································································韓 晨，孫付濤 39（5）：33

高頻焊鋁合金冷凝器集流管線能量的研究································································································曹國富，曹麗珠 39（5）：39

超彈性β-Ti合金研究進展······················································馬廣昊，李 強，常春濤，何美鳳，王新敏，潘 登 39（5）：46

低壓鑄造法制備鋁基復合材料的研究現狀···········································································鄭小秋，謝世坤，易榮喜，郭秀艷 39（5）：51

光電催化還原CO2金屬氧化物催化材料研究進展······················································張瑞新，蔡 晴，王燕剛，康詩飛，左元慧，崔立峰 39（5）：58

無鍍鎳銅鋁低溫釬焊工藝研究·······························································曹凱，劉平，劉新寬，王子延，張卓，曹蒙云 39（6）： 1

固體酸催化混合胺的CO2解吸性能分析·····················································································曹一凡，史煥聰，崔立峰 39（6）： 7

氮化硅光固化增材制造工藝與性能的研究··············································································嚴鵬飛，嚴彪，王聯鳳，程靈鈺 39（6）：12

ProCAST在汽車輪轂制造中的應用···································································································鐘強強，王晶 39（6）：16

銅排表面質量的影響因素及控制方法································································································黃路稠，高育紅39（6）：23

新型生物醫用鈦合金的設計及應用進展·························································麻西群，于振濤，牛金龍，余森，劉少輝，賀新杰 39（6）：26

鎢的釬焊研究進展·····················································································陳遠亭，李先芬，陳柏炎 39（6）：32

微納結構硅在鋰離子電池中的研究現狀··············································································劉旭燕，吳曉龍，楊敏，朱新杰 39（6）：37

氫氧化鎂基阻燃劑的研究進展··········································································································謝超飛 39（6）：44

支架用NiTi合金的表面改性方法研究進展·······················································································張涵，張柯，劉平，田浩 39（6）：48