第1期

?顆粒制備PowderPreparation?

改性水滑石類材料的制備及其吸附性能研究進展

張爽，丁欣欣，閆良國( 1 )

Research progress on preparation and adsorption properties of modified layered double hydroxides

ZHANGShuang，DINGXinxin，YANLiangguo

二維納米材料在腐蝕防護中的應用研究進展

趙一志，沈志剛，張曉靜，趙小虎(11)

Research progress on application of two-dimensional nano-materials in corrosion protection

ZHAOYizhi，SHENZhigang，ZHANGXiaojing，ZHAOXiaohu

膜分散微反應器制備γ-氧化鋁千克級放大試驗

萬莉莎，李菲，趙申遠，張建輝，王玉琪，王玉軍(22)

Kilogram-scale magnification test for preparation ofγ-Al2O3in membrane dispersion microreactor

WANLisha，LIFei，ZHAOShenyuan，ZHANGJianhui，WANGYuqi，WANGYujun

超臨界CO2抗溶劑法制備依折麥布顆粒

張卓，李慶領，郝貴周，曹榮凱，郝明潔，胡德棟(32)

Preparation of Ezetimibe by supercritical CO2anti-solvent process

ZHANGZhuo，LIQingling，HAOGuizhou，CAORongkai，HAOMingjie，HUDedong

無水乙醇輔助低溫直接法制備堿式碳酸鎂晶體

劉珈伊，王余蓮，時天驕，徐昊，張夏翔，李闖，袁志剛(41)

Preparation of basic magnesium carbonate crystals with low temperature direct method by anhydrous

ethanol-assisted process

LIUJiayi，WANGYulian，SHITianjiao，XUHao，ZHANGXiaxiang，LIChuang，YUANZhigang

?氣溶膠Aerosol?

安全殼內水池氣泡破碎后夾帶液滴的粒徑分布

魏嚴凇，陳林林，鄭光宗，陳皞，谷海峰，季松濤(50)

Particle size distribution of entrained droplets generated by pool bubble breaking in containment

WEIYansong，CHENLinlin，ZHENGGuangzong，CHENHao，GUHaifeng，JISongtao

?工程技術PowderEngineering?

多孔噴吹氣流偏斜對濾筒清灰性能的影響

任玲，袁娜，林龍沅(58)

Influence of airflow deflection of porous jet on cleaning performance of filter cartridge

RENLing，YUANNa，LINLongyuan

?粉塵爆炸DustExplosion?

無機惰性介質對面粉爆炸的抑制效果與機理

關文玲，李雪源，董呈杰(65)

Inhibition effect and principle of inorganic inert medium on flour explosion

GUANWenling，LIXueyuan，DONGChengjie

?顆粒測試與表征PowderMeasurementandCharacterization?

基于表面能的濕煤顆粒含水率表征方法

廖貴文，姜永正，胡亞凡，朱升碩，苗晶晶，桂建新(71)

Methods for characterizing the moisture content of wet coal particles based on surface energy

LIAOGuiwen，JIANGYongzheng，HUYafan，ZHUShengshuo，MIAOJingjing,GUIJianxin

廢玻璃粉對水泥基材料流動性能的影響

熊志文，柯國軍，陶望，鄒品玉(80)

Influence of waste glass powder on fluidity of cement-based materials

XIONGZhiwen，KEGuojun，TAOWang，ZOUPinyu

納米SiO2粉體在水泥液相中的分散性

王建榮，石捷，關芳，侯鵬坤(90)

Dispersion of nano-SiO2powder in cement liquid phase

WANGJianrong，SHIJie，GUANFang，HOUPengkun

第2期

?粉體加工與處理PowderTreatmentandProcess?

工業固體廢棄物制備陶粒及其應用研究進展

汪學彬，楊重卿，張祥偉，侯東來，孫志明( 1 )

Preparation and application of ceramsite prepared from industrial solid waste：a review

WANGXuebin，YANYChongqing，ZHANGXiangwei，HOUDonglai，SUNZhiming

基于破碎馬氏鏈模型的最佳入磨粒度

姜志宏，李恒，姜曉鋒，劉鋼湘( 9 )

Optimal grain size based on broken Markov chain model

JIANGZhihong，LIHeng，JIANGXiaofeng，LIUGangxiang

碳?xì)饽z超細粉體的可控制備技術

于照亮，彭文聯，劉清海，張彤，代曉東(17)

Controllable preparation techniche of carbon aerogel ultrafine powder

YUZhaoliang，PENGWenlian，LIUQinghai，ZHANGTong，DAIXiaodong

基于Fluent的3D打印機成型腔內氣固兩相流動特性

蒲志新，武志龍，賈加亮，張齊魯(22)

Gas-solid two-phase flow characteristics in molding cavity of 3D printer based on Fluent

PUZhixin，WUZhilong，JIAJialiang，ZHANGQilu

基于遺傳算法的多功能木質板材配比

徐浩然，賀福強，薛亞軍，李赟(30)

Multifunctional wood plate proportion based on genetic algorithm

XUHaoran，HEFuqiang，XUEYajun,LIYun

核-殼結構TiO2@Al2O3制備工藝的優化

黃增尉，徐林沖，袁愛群，白麗娟，吳勝富，韋冬萍(37)

Optimization of preparing process for pore-shell structure TiO2@Al2O3

HUANGZengwei，XULinchong，YUANAiqun，BAILijuan，WUShengfu，WEIDongping

不同粉磨工藝對粉煤灰顆粒群分布特征的影響

鄒紅生，唐凱靖，楊飛，曾玻，陳思潔，陳海焱(47)

Influence of different grinding technology on distribution characteristics of fly ash particle group

ZOUHongsheng，TANGKaijing，YANGFei，ZENGBo，CHENSijie，CHENHaiyan

?工程技術EngineeringTechnology?

運行參數對雙排料管下排氣式旋風分離器的性能影響

孫思敏，郭帥，王小芳，朱治平(54)

Effect of operating parameters on performance of uniflow cyclone with two-particle outlets

SUNSimin，GUOShuai，WANGXiaofang，ZHUZhiping

基于CFD-DPM的旋風分離器結構設計優化

彭麗，柳冠青，董方，石戰勝(63)

Structure optimization and design of cyclone separator based on CFD-DPM

PENGLi，LIUGuanqing，DONGFang，SHIZhansheng

基于蒙特卡羅法模擬高含量氣固兩相流聲衰減

祖曉萌，朱曙光(74)

Simulation of ultrasonic attenuation in concentrated gas-solid two-phase flow based on Monte Carlo

method

ZUXiaomeng，ZHUShuguang

雙進雙出磨煤機直吹式制粉系統的性能優化及改造

董方，馬治安，彭麗，石戰勝，柳冠青，李宗慧(82)

Optimizing and reformation of direct blowing pulverizing system with double-inlet and double-outlet

ball mill

DONGFang，MAZhian，PENGLi，SHIZhansheng，LIUGuanqing，LIZonghui

生膠結構參數對三元乙丙橡膠性能的影響

楊永清，馬宇翔，王小龍(87)

Influence of basic structural parameters on properties of EPDM

YANGYongqing，MAYuxiang，WANGXiaolong

?顆粒測試與表征PowderMeasurementandCharacterization?

油胺改性碳納米顆粒在新戊基多元醇酯中的潤滑性能

陳勇剛，馮鵬宇，劉翔，張磊(96)

Lubricant properties of oleylamine grafted carbon nanoparticles in neopentyl polyol ester

CHENYonggang，F(xiàn)ENGPengyu，LIUXiang，ZHANGLei

釩酸鹽熒光粉研究進展

張磊，張雪峰，趙朝勇，陳敏(102)

Research progress on phosphors of vanadate

ZHANGLei，ZHANGXuefeng，ZHAOChaoyong，CHENMin

第3期

?粉體加工與處理PowderTreatmentandProcess?

白光LED用熒光陶瓷研究進展

王剛，李金凱，段廣彬，劉宗明( 1 )

Research progress of fluorescent ceramics for white LEDs

WANGGang，LIJinkai，DUANGuangbin，LIUZongming

超細粉煤灰物理特性對漿體性能的影響與機理

曾玻，鄒紅生，楊飛，唐凱靖，王建波，李星，林龍沅( 7 )

Effect and mechanism of physical charactertics of ultrafine fly ash on properties of cement paste

ZENGBo，ZOUHongsheng，YANGFei，TANGKaijing，WANGJianbo，LIXing，LINLongyuan

?流態化Fluidization?

旋流流化床內的流動及傳熱特性

武強，章凱，王帥(16)

Flow and heat transfer characteristics in swirling fluidized bed

WUQiang，ZHANGKai，WANGShuai

高爐渣余熱裂解輪胎顆粒流化床的設計及實驗研究

張浩，儀垂杰，孫啟棟，趙韓非，劉松(25)

Design and experiment study of fluidized bed for cracking tire particles with blast furnace slag waste

heat

ZHANGHao，YIChuijie，SUNQidong，ZHAOHanfei，LIUSong

合成吡啶堿的新型耦合反應器進料段流動行為

周帥帥，喬聰震，楊浩，田亞杰，蒲彥鋒，劉夢溪，盧春喜(35)

Flow behavior in feed injection zones of novel coupled fluidized bed reactor for pyridine base synthesis

ZHOUShuaishuai，QIAOCongzhen，YANGHao，TIANYajie，PUYanfeng，LIUMengxi，LUChunxi

液-固流化床顆粒流態化特性實驗研究

劉阿珍，張衛義，李漢勇，李星波(43)

Experimental study on particle characteristics of liquid-solid fluidized bed

LIUAzhen，ZHANGWeiyi，LIHanyong，LIXingbo

?顆粒測試與表征PowderMeasurementandCharacterization?

鑒別粒度儀分辨率高低的多峰粒度分布標準物質

陳勝利，陳勝，孫偉，趙相東(50)

Standard materials with multi-peak particle size distribution for evaluation of resolution of particle size

analyzers

CHENShengli，CHENSheng，SUNWei，ZHAOXiangdong

鈣鋁和鐵鋁水滑石的制備及其吸附水中六價鉻的性能

王鵬瑞，楊丹，張雪，李靜，閆良國(59)

Preparation of CaAl- and FeAl-layered double hydroxides and adsorptive removal Cr(VI) in aqueous

solutions

WANGPengrui，YANGDan，ZHANGXue，LIJing，YANLiangguo

光場偏振態對布朗運動擴散系數的影響

陳柏樺，劉冬梅，邱健，彭力，駱開慶，韓鵬(68)

Polarization effect on diffusion coefficient of Brownian motion

CHENBaihua，LIUDongmei，QIUJian，PENGLi，LUOKaiqing，HANPeng

?顆粒制備PowderPreparation?

一維CdS-Co9S8復合材料的制備及光催化產氫性能

張寧，馮靖書，楊倩倩，閆濤(73)

Sythesis of 1D CdS-Co9S8composites for photocatalytic hydrogen production

ZHANGNing，F(xiàn)ENGJingshu，YANGQianqian，YANTao

基于Cu-BTC骨架的Cu2O-CuO復合材料的制備及吸其附性能

唐安宇，何曼麗，陳九玉，周鑫浩，王丙佳，王俊議，楊毅(80)

Preparation and its adsorption properties of Cu2O-CuO composite material based on Cu-BTC framework

TANGAnyu，HEManli，CHENJiuyu，ZHOUXinhao，WANGBingjia，WANGJunyi，YANGYi

基于SiC-ZAS復相粉體的合成模擬固化高放射性石墨

曹雪，滕元成，王山林，王文(89)

Simulating immobilizing high-radioactive graphite based on synthesis of SiC-ZAS composite powder

CAOXue，TENGYuancheng，WANGShanlin，WANGWen

基于溫壓瞬變的纖維狀黏土礦物粉體的制備

周友行，宋佳林，徐長鋒，沈旺，趙玉(97)

Research progress on phosphors of vanadate

ZHOUYouhang，SONGJialin，XUChangfeng，SHENWang，ZHAOYu

?工程技術EngineeringTechnology?

氫氧化鈣對機械力活化鉀長石中鉀元素活性的影響

張仙梅，蓋國勝，何振全，蓋東海，李仁濤，孟繁榮，李小燕(105)

Effect of mechanical activation on potassium of potash feldspar adding calcium hydroxide

ZHANGXianmei，GAIGuosheng，HEZhenquan，GAIDonghai，LIRentao，MENGFanrong，LIXiaoyan

第4期

?顆粒制備PowderPreparation?

Eu3+摻雜石榴石型釩酸鹽熒光粉研究進展

楊光旭，李金凱，劉宗明( 1 )

Effect of Eu3+-doping on garnet vanadate：a review

YANGGuangxu，LIJinkai，LIUZongming

微波法制備Cu2O@ZIF-8及其對廢水中U(VI)吸附性能

王丙佳，何曼麗，陳九玉，周鑫浩，唐安宇，王鵬，龔春慧，楊毅( 8 )

Preparation of Cu2O@ZIF-8 by microwave method and its adsorption performance for U(VI) in

wastewater

WANGBingjia，

HEManli，CHENJiuyu，ZHOUXinhao，TANGAnyu，WANGPeng，GONGChunhui，YANGYi

硅灰對城市固體垃圾焚燒飛灰熔融特性的影響

趙昂然，任強強(16)

Effect of silica fume on melting characteristics of MSWI fly ash

ZHAOAngran，RENQiangqiang

苧麻骨基復合材料制備與阻燃抑煙特性分析

張嘉文，劉俊懷，何惠，劉意，何玉琴，張紅，吳慶定(27)

Preparation of ramie bone-based composite and analysis of flame retardant and smoke suppression

characteristics

ZHANGJiawen，LIUJunhuai，HEHui，LIUYi，HEYuqin，ZHANGHong，WUQingding

錳基吸附劑的制備及其吸附性能

許澤華，何家俊，戴鎮壇，李永峰，竇永深，劉三毛(36)

Preparation of Mn-based adsorbents and its adsorption performance

XUZehua，HEJiajun，DAIZhentan，LIYongfeng，DOUYongshen，LIUSanmao

煤粉預熱燃燒中硫元素轉化特性實驗

張嘉航，朱建國，張毅(45)

Experimental research on sulfur conversion characteristics of pulverized coal preheating combustion

ZHANGJiahang，ZHUJianguo，ZHANGYi

?顆粒測試與表征PowderMeasurementandCharacterization?

MIL-101前驅體制備MnOx-Cr2O3催化劑及其對苯的催化氧化性能

鄭欽中，武曉峰，陳運法(54)

Preparation of MnOx-Cr2O3from MIL-101 precursor and its catalytic oxidation performance for benzene

ZHENGQinzhong，WUXiaofeng，CHENYunfa

碳納米管負載鉑金顆粒的微觀形貌表征

吉鈺純，王吉林，羅志虹(63)

Microstructure characterization of platinum nanoparticles loaded on carbon nanotubes

JIYuchun，WANGJilin，LUOZhihong

?粉體加工與處理PowderProcessingandTreatment?

天然石墨的球形化工藝參數優化

滕德亮，李朋，袁娜，呂娟，陳俊冬，林龍沅，陳海焱(70)

Process parameters optimization of natural graphite spheroidization

TENGDeliang，LIPeng，YUANNa，LYUJuan，CHENJundong，LINLongyuan，CHENHaiyan

?工程技術EngineeringTechnology?

基于目標檢測網絡的煤矸石識別

高新宇，李博，王璐瑤，李廉潔，王學文(77)

Identification of coal and gangue based on object detection network

GAOXinyu，LIBo，WANGLuyao，LILianjie，WANGXuewen

?流態化Fluidization?

基于CFD-DEM的金屬纖維濾網反吹過濾特性研究

彭濤，丁昕越，劉雪東，蔣威，顧宇彤，劉梅華，朱梓瑞(84)

Research on back-blowing characteristics of metal fiber filter based on CFD-DEM

PENGTao，DINGXinyue，LIUXuedong，JIANGWei，GUYutong，LIUMeihua，ZHUZirui

溫度場對供料器管道內顆粒分布影響的CFD模擬

張曉儀，柳波，劉鎮業，李東暉(93)

Influence of temperature field on particle distribution in feeder pipeline with CFD simulation

ZHANGXiaoyi，LIUBo，LIUZhenye，LIDonghui

穩渦器提升旋風分離器性能的流場分析

王佳音，徐國，趙澤華，張榮華，楊景軒，郝曉剛(104)

Flow field analysis of cyclone separator performance improved by vortex stabilizer

WANGJiayin，XUGuo，ZHAOZehua，ZHANGRonghua，YANGJingxuan，HAOXiaogang

操作參數對液固流化床分級性能的影響

石賽，劉匯洋，俞建峰，黃然，錢陳豪(113)

Effect of operating parameters on classification performance of liquid-solid fluidized bed

SHISai，LIUHuiyang，YUJianfeng，HUANGRan，QIANChenhao

基于介尺度曳力模型雙組分顆?；旌系腃FD模擬

宋曉皎，王帥(120)

CFD simulation of two-component particle mixing based on meso-scale drag model

SONGXiaojiao，WANGShuai

雙螺桿粉體混合機混合均勻性的三維模擬與評價

葉廣朋，劉振峰，周國發(130)

Three-dimensional simulation and evaluation of mixing uniformity of twin-screw powder mixer

YEGuangpeng，LIUZhenfeng，ZHOUGuofa

?氣溶膠Aerosol?

散煤燃燒的PM2.5排放特征及排放清單

楊彬，吳健，周衛青，李朋，白曉春，吳華成，王綠，武云飛(138)

Emission characteristics and emission list of PM2.5from residential coal combustion

YANGBin，WUJian，ZHOUWeiqing，LIPeng，BAIXiaochun，WUHuacheng，WANGLyu，WUYunfei

第5期

?粉塵爆炸DustExplosion?

影響靜電火花放電的因素

陳坤，張小良，陶光遠，王昊博，黃兵，趙彥麗( 1 )

Influence factors of electrostatic spark discharge

CHENKun，ZHANGXiaoliang，TAOGuangyuan，WANGHaobo，HUANGBing，ZHAOYanli

?工程技術EngineeringTechnology?

撞擊流中顆粒運動行為的CFD-DEM模擬

李東暉，柳波，張曉儀，劉鎮業(11)

CFD-DEM simulation of particle motion behavior in impinging stream

LIDonghui，LIUBo，ZHANGXiaoyi，LIUZhenye

水泥工業提升機料斗超高分子量聚乙烯襯板選型及應用

高亞龍，王愷，楊學鋒，李萬洋，許阿利，胡國棟，王秒秒(20)

Selection and application of UHMW-PE liner for elevator hopper in cement industry

GAOYalong，WANGKai，YANGXuefeng，LIWanyang，XUAli，HUGuodong，WANGMiaomiao

刮板輸送機中部槽堆焊條紋法修復工藝參數優化

劉朝陽，李博，李娟莉(27)

Optimization of process parameters for surfacing welding stripes in middle trough

LIUZhaoyang，LIBo，LIJuanli

求解顆粒凝并與反彈的DSMC方法及應用

吳志豪，凡鳳仙，胡曉紅(38)

Development and verification of DSMC method for solving particle agglomeration and rebound

WUZhihao，F(xiàn)ANFengxian，HUXiaohong

重型車空氣濾清器脈沖清灰數值模擬分析

龔呈，錢付平，徐志成，陳路敏，劉哲，付躍虎(47)

Numerical simulation of pulse dust cleaning for heavy duty vehicle air filter

GONGCheng，QIANFuping，XUZhicheng，CHENLumin，LIUZhe，F(xiàn)UYuehu

MAX相高溫吸波材料的研究進展

郭陽，張雪峰，陳敏，李會容(58)

Research progress of MAX phase high temperature absorbing materials

GUOYang，ZHANGXuefeng，CHENMin，LIHuirong

?粉體加工與處理PowderProcessingandTreatment?

天然纖維素粉體與蛋白質粉體的制備及其應用

韓曉玉，王運利(64)

Preparation and application of natural cellulose powder and protein powder

HANXiaoyu，WANGYunli

?顆粒測試與表征PowderMeasurementandCharacterization?

氣體體積置換法骨架密度測量的影響因素

吳立敏，薛民杰(70)

Influencing factors of skeleton density measurement by gas volume displacement method

WULimin，XUEMinjie

甲醇制丙烯失活分子篩催化劑超細化動力學分析

劉永東，吳永鴻，蘇慧，田敬曉，金政偉，尹佳杰，羅發亮(77)

Kinetics analysis of ultrafinement for deactivated molecular sieve catalyst from methanol to propylene

process

LIUYongdong，WUYonghong，SUHui，TIANJingxiao，JINZhengwei，YINJiajie，LUOFaliang

約束型活動擋板對滾筒內特定二元顆粒混合過程的影響

秦德越，榮文杰，李寶寬(85)

Influence of constrained moving baffle on particle mixing in rotating drum

QINDeyue，RONGWenjie，LIBaokuan

?流態化Fluidization?

立式上行管內液固兩相流中橢球形顆粒分布和運動特性

彭德其，王依然，侯家鑫，俞天蘭，吳淑英，王志平(94)

Distribution and motion characteristics of ellipsoidal particles in liquid-solid two-phase flow in vertical

upward pipe

PENGDeqi，WANGYiran，HOUJiaxin，YUTianlan，WUShuying，WANGZhiping

?顆粒制備PowderPreparation?

微波誘導燃燒法制備納米鋁酸鑭及其表征

范華風，孟竺，吳鉗，吳靜，張靜，儲剛(105)

Preparation and characterization of nano-lanthanum aluminate by microwave induced combustion

method

FANHuafeng，MENGZhu，WUQian，WUJing，ZHANGJing，CHUGang

碲化鉍納米材料的制備及其應用研究進展

王聰，康偉峰，張林慧，徐永鴻，仲斌年(111)

Preparation and application of Bi2Te3nanomaterials: a review

WANGCong，KANGWeifeng，ZHANGLinhui，XUYonghong，ZHONGBinnian

共沉淀法制備三水碳酸鎂晶體及生長機理

時天驕，王余蓮，劉珈伊，薛琛，李闖，徐昊，袁志剛(120)

Preparation and growth mechanism of nesquehonite crystals with co-precipitation method

SHITianjiao，WANGYulian，LIUJiayi，XUEChen，LIChuang，XUHao，YUANZhigang

親油性納米HgSe的合成與反應機理

吳首昂，劉番，龔興厚(128)

Synthesis and characterization of lipophilic HgSe nanoparticles

WUShouang，LIUFan，GONGXinghou

Ti3C2Tx基納米復合材料的制備及其鋰離子電池負極性能的改進作用

申健，李麗，段廣彬(134)

Preparation of Ti3C2Tx-nanocomposites and its improvement of anode performance of lithium ion battery：

a review

SHENJian，LILi，DUANGuangbin

第6期

?顆粒制備PowderPreparation?

氮化硼納米片復合材料防腐涂層的制備及性能

張曉靜，沈志剛，劉磊，劉立新，趙一志( 1 )

Preparation and properties of boron nitride nanosheet composite anticorrosive coating

ZHANGXiaojing，SHENZhigang，LIULei，LIUlixin，ZHAOYizhi

ZIF-8@LDO多孔復合材料的合成及表征

李智穎，顧傲天，付豪，陳九玉，陳凱偉，楊毅(11)

Synthesis and characterization of ZIF-8@LDO porous composites

LIZhiying，GUAotian，F(xiàn)UHao，CHENJiuyu，CHENKaiwei，YANGYi

基于水體中氨氮、硫凈化礦物顆粒的制備與性能

杜玉成，史默涵，林彭輝，李楊，甄爽，馬延龍，王金淑(19)

Preparation and performance of mineral particles based on ammonia and sulfur purification in water

DUYucheng，SHIMohan，LINPenghui，LIYang，ZHENShuang，MAYanlong，WANGJinshu

等離子噴涂用納米MoO3-Bi2O3復合粉體的制備

孫航，賈均紅，楊杰，何乃如，楊鑫然，蔡糧臣(29)

Preparation of nano-structured MoO3-Bi2O3composite powder for plasma spraying

SUNHang，JIAJunhong，YANGJie，HENairu，YANGXinran，CAILiangchen

?氣溶膠Aerosol?

新冠疫情期間西安市北郊PM2.5化學特征及源解析

祝穎，羅靜期，劉煥武，沈振興，李業鑫，劉言正，周勇(37)

Analysis of chemical characteristics and source of PM2.5in northern urban area of Xi’an city during

COVID-19 period

ZHUYing，LUOJingqi，LIUHuanwu，SHENZhenxing，LIYexin，LIUYanzheng，ZHOUYong

?顆粒測試與表征PowderMeasurementandCharacterization?

基于數字圖像的三維不規則砂巖顆粒破裂力學特性

史開文，左宇軍，孫文吉斌，劉鎬，鄔忠虎，林健云，李濤濤(50)

Fracture mechanical properties of three-dimensional irregular sandstone particles based on digital image

SHIKaiwen，ZUOYujun，SUNWenjibin，LIUHao，WUZhonghu，LINJianyun，LITaotao

基于JKR接觸模型的微米級顆粒離散元參數標定

韓偉，王紹宗，張倩，田宇航(60)

Discrete element parameter calibration of micron sized powder particles based on JKR contact model

HANWei，WANGShaozong，ZHANGQian，TIANYuhang

?粉體加工與處理PowderProcessingandTreatment?

納米聚吡咯對硅烷膜耐蝕性的影響

許瀟雨，李麗，王建榮，段廣彬(70)

Effect of nano-polypyrrole on corrosion resistance of silane films

XUXiaoyu，LILi，WANGJianrong，DUANGuangbin

粒徑對偏高嶺土基地聚物工作性能和力學強度的影響

吳廉潔，葉楚雄，歐陽高尚，王勁松，易明明(75)

Effect of particle size on workability and mechanical strength of metakaolin based geopolymers

WULianjie，YEChuxiong，OUYANGGaoshang，WANGJinsong，YIMingming

分散劑對氧化鋯漿料和燒結坯片性能的影響

吳旭旭，謝光遠，吳傳棟，時可(85)

Effect of dispersant on properties of zirconia slurry and its sintered billet

WUXuxu，XIEGuangyuan，WUChuandong，SHIKe

廢鋁分級分選機工藝參數優化

汪前進，韓文博，韋帆，吳軍，丁文捷，張佃平，李宏燕(92)

Optimization of process parameters of waste aluminum classifying and sorting machine

WANGQianjin，HANWenbo，WEIFan，WUJun，DINGWenjie，ZHANGDianping，LIHongyan

氫離子與崗石廢渣的作用機理

原野，黃俊俊，桂成梅，張寧坤，秦廣超，李奇洪，李鵬，張星飛(98)

Action mechanism of H+and granite residue

YUANYe，HUANGJunjun，GUIChengmei，

ZHANGNingkun，QINGuangchao，LIQihong，LIPeng，ZHANGXingfei

正交分析免蒸壓粉煤灰加氣混凝土性能

英志剛，雷一鳴，喬林，李金凱，劉宗明(105)

Orthogonal analysis on performance of non-autoclaved fly ash aerated concrete

YINGZhigang，LEIYiming，QIAOLin，LIJinkai，LIUZongming

?流態化Fluidization?

結構參數對臥式單排料管下排氣式旋風分離器性能的影響

張思源，孫思敏，郭帥，王小芳，朱治平(112)

Influence of structural parameters on performance of horizontal cyclone separator with single discharge

pipe

ZHANGSiyuan，SUNSimin，GUOShuai，WANGXiaofang，ZHUZhiping

脈沖噴吹金屬長濾袋的清灰性能

李朋，薛峰，康彥，馬小輝，顏翠平，陳海焱，侯力強，錢云樓(121)

Cleaning performance of pulse injection on long metal filter bag

LIPeng，XUEFeng，KANGYan，MAXiaohui，YANCuiping，CHENHaiyan，HOULiqiang，QIANYunlou

基于離散元法的旋振篩振動參數優化

賈培宇，李占福，司啟明，童昕(127)

Vibration parameter optimization of rotary vibrating screen based on discrete element method

JIAPeiyu，LIZhanfu，SIQiming，TONGXin

基于CFD的H型真空手套箱氣固兩相流動特性分析

蒲志新，賈加亮，武志龍，翟孖廣(135)

Gas-solid two-phase flow characteristics of H-type vacuum glove box based on CFD

PUZhixin，JIAJialiang，WUZhilong，ZHAIZiguang

(TheendofVol.27)