彭 能,蘇玉長,肖方明

1.中南大學材料科學與工程學院,湖南長沙410083;2.廣東省工業技術研究院(廣州有色金屬研究院),廣東廣州510650

La-Mg-Ni系儲氫合金儲氫性能研究

彭 能1,2,蘇玉長1,肖方明2

1.中南大學材料科學與工程學院,湖南長沙410083;2.廣東省工業技術研究院(廣州有色金屬研究院),廣東廣州510650

采用快淬法制備了不同鎂含量的La-M g-Ni系儲氫合金,并研究了La-M g-Ni系儲氫合金的儲氫特性.結果表明,La-Mg-Ni系儲氫合金主要由LaNi5和LaNi3兩相組成;隨著鎂含量的增加,儲氫合金的吸放氫平臺壓力降低,吸氫量提高;與化學計量比儲氫合金相比,非化學計量比的儲氫合金平臺壓力提高;在1173 K熱處理4 h后,儲氫合金具有較好的吸/放氫平臺性能,其吸氫量可達1.59%.

快淬法;La-M g-Ni系儲氫合金;儲氫性能

商品化AB5型儲氫合金儲氫量低、生產成本較高,儲氫容量的提升空間不大,從而限制了其在燃料電池中的應用.而AB3型La-M g-Ni系合金具有儲氫量大、放電容量高、活化快等優勢,近年來成為各高校、科研院所及企業的研究熱點[1-7].但是該合金的相關研究仍處于實驗階段,尚存在放電容量不穩定、循環壽命差等問題.我們采用常規真空負壓快淬爐,通過添加覆蓋劑,選擇合適的熔煉工藝條件,解決了熔煉過程中鎂大量揮發導致合金成分不穩定的問題,獲得了成分均勻的La-M g-Ni系納米晶儲氫合金.在前期工作[8-9]的基礎上,本文研究了鎂含量及熱處理工藝對合金儲氫性能的影響.

1 實驗部分

1.1 合金粉的制備

實驗用原材料為L(zhǎng)a,Ce,Ni,Co,M n,A l和M g,其純度均大于99.9%.在氬氣保護的快淬爐中,通過添加覆蓋劑對原材料進行熔煉,合金液保溫一段時間后經冷卻銅輥制得0.05～1.5 mm厚的合金片.在850～1020℃熱處理后,采用機械球磨制得一系列La-M g-Ni儲氫合金.

1.2 性能測試

采用日本 RIN T-1100型 X射線衍射儀(Cu Kα靶)分析儲氫合金的相結構.采用上海冶金所的 YJ-1全自動 P-C-T測試儀對合金的吸放氫性能進行表征.

2 結果與討論

2.1 合金的相組成

圖1為不同M g含量La-M g-Ni系儲氫合金的X-射線衍射圖.圖 1表明,La-M g-Ni合金主要由LaNi5和LaNi3兩相組成;當鎂含量增加時,LaNi5相減少,LaNi3相增加,說明鎂能夠促進LaNi3相的形成[10].此外,由于 M g原子半徑(1.72×10-10mm)小于La原子半徑(2.74×10-10mm),當 M g替代A側的La后,導致晶軸收縮,晶胞體積變小.這一點可以由隨著鎂含量不斷增加,合金的特征峰逐漸向高角度方向偏移的結果來證實.

圖1 儲氫合金的XRD圖Fig.1 XRD pattern of hydrogen sto rage alloy

2.2 La-Mg-Ni系儲氫合金的儲氫性能

2.2.1 鎂含量對合金儲氫性能的影響

不同鎂含量的La-M g-Ni系儲氫合金 PCT曲線如圖2所示.由圖2可知,隨著鎂含量提高,儲氫合金的吸放氫平臺壓力降低,吸氫量提高.M g含量較高時,儲氫合金平臺壓力較低,這是由于生成的氫化物過于穩定使部分氫無法釋放出來,導致儲氫合金放氫量減少,平臺區域變窄.當 M g摩爾分?jǐn)?shù)為0.3時,儲氫容量較高,其吸氫量可達到1.54%.

圖2 在298K不同鎂含量?jī)?chǔ)氫合金的PCT曲線Fig.2 PCT curve of hydrogen sto rage alloys w ith different Mg content at 298K

2.2.2 非化學計量比對儲氫合金儲氫性能的影響

對儲氫材料進行升溫真空脫氣后及吸放氫活化2次后,在室溫(298 K)下測試其吸放氫性能,其吸放氫PCT曲線如圖3所示.從圖3可知,與化學計量比的La0.7M g0.3Ni3.5合金相比,兩種非化學計量比的儲氫合金平臺壓力提高.其中La0.7M g0.3Ni3.25儲氫合金具有較好的平臺性能,平臺壓力較高,吸氫量達到1.45%.

圖3 在298K非化學計量比儲氫合金的吸放氫性能Fig.3 The hydrogen absorp tion and desorp tion p roperties of non-stoichiometric hydrogen storage alloy at 298K

2.2.3 熱處理對儲氫合金儲氫性能的影響

將La0.7M g0.3Ni3.5儲氫合金在1173 K熱處理4 h后,在室溫(298 K)下測試儲氫合金的吸/放氫性能,其吸放氫 PCT曲線如圖4所示.由圖4可知,經熱處理后,La0.7M g0.3Ni3.5儲氫合金的平臺壓力和平臺性能提高,吸氫量達到1.59%.

3 結 論

采用快淬法制備了不同鎂含量的La-M g-Ni系儲氫合金,該合金主要由LaNi5和LaNi3兩相組成.隨著鎂含量的增加,儲氫合金的吸放氫平臺壓力降低,吸氫量提高.與化學計量比儲氫合金La0.7M g0.3Ni3.5相比,非化學計量比的儲氫合金平臺壓力提高.La0.7M g0.3Ni3.5儲氫合金在1173 K熱處理4 h后具有較好的吸/放氫平臺性能,其吸氫量可達到1.59%.

[1]ZHANG Yanghuan,DONG Xiaoping,WANG Guoqing,et al.Effectsof rapid quenching onmicrostructures and electrochemical p roperties of La0.7M g0.3Ni2.55Co0.45Bx(x=0～0.2)hydrogen storage alloy[J].Transactions of Nonferrous Metals Society of China,2007,16:800-807.

[2]L IU Yongfeng,PAN Hongge,YUE Yuanjian,et al.Cycling durability and degradation behavio r of La-M g-Ni-Co type metal hydride electrodes[J].Journal of A lloys and Compounds,2005,395:291-299.

[3]PAN Hongge,CHEN Ni,GAO M ingxia,et al.Effects of annealing temperature on structure and the electrochemical p roperties of La0.7Mg0.3Ni2.45Co0.75M n0.1A l0.2hydrogen sto rage alloy[J].Journal of A lloys and Compounds,2005,397:306-312.

[4]L IU Yongfeng,PAN Hongge,GAO Mingxia,et al.Investigation on characteristicsof La0.7Mg0.3Ni2.65Mn0.1Co0.75+x(x=0～0.85)metal hydride electrode alloys fo r Ni/M H batteries PartⅡ:Electrochemical perfo rmances[J].Journal of Alloys and Compounds,2005,388:109-117.

[5]PAN Hongge,L IU Yongfeng,GAO M ingxia,et al.The structure and electrochemical p roperties of La0.7M g0.3(Ni0.85Co0.15)x(x=3.0～3.5)hydrogen sto rage alloys[J].International Journal of Hydrogen Energy,2003,28:1219-1228.

[6]ZHANG Yanghuan,L IBaowei,CA I Ying,et al.Electrochem ical perfo rmances and microstructure of the meltspun La-M g-Ni system hydrogen storage alloys[J].Rare Metal Materials and Engineering,2007,36(1):108-112.

[7]ZHANG Faliang,LUO Yongchun,WANG Dahui,et al.Structure and electrochemical p roperties of La2-xM gxNi7.0(x=0.3～0.6)hydrogen storage alloys[J].Journal of A lloys and Compounds,2007,439:181-188.

[8]WANG Ying,LU qiyun,PENG Neng,et al.Effect of heat-treatment p rocess on p roperties of rare earth M gbased system hydrogen storage alloys w ith AB3-type[J].Journal of Rare Earths,2006,24(S1):340-342.

[9]TANGRenheng,LU qiyun,XIAO Fangming,et al.Study on nanocrystalline of rare earth M g-based system hydrogen storage alloyswith AB3-type[J].Journalof Rare Earths,2006,24(S1):343-346.

[10]ZHANG Zhong,HAN Shumin,L I Yuan,et al.Electrochemical p roperties of M11-xM gxNi3.0M n0.10Co0.55A l0.10(x=0.05～0.30)hydrogen storage alloys[J].Journal of A lloys and Compounds,2007,431:208-211.

Hydrogen storage properties of La-Mg-Ni hydrogen storage alloys

PENG Neng1,2,SU Yuchang1,XIAO Fangming2
1.College of M aterial Science and Engineering,Central South University,Changsha 410083,China;2.Guangdong Genera l Research Institute of Industrial Technology(Guangzhou Research Institute of N onferrous M etals),Guangzhou 510650,China

La-M g-Ni hydrogen storage alloys w ith different M g content were p repared by rapid quenching method and hydrogen storage p ropertiesof these alloyswere investigated.XRD results showed that theses alloyswere mainly composed of LaNi5and LaNi3;w ith the increase of M g content,the hydrogen absorption/desorp tion p lateau p ressure of the alloys lowered and their hydrogen absorp tion capacity increased;p lateau p ressure of the non-stoichiometric hydrogen sto rage alloys increased compared to the stoichiometric hydrogen sto rage alloy;after 4 hoursof heat treatment at 1173 K,the hydrogen sto rage alloy had good absorp tion/desorp tion p lateau performance w ith hydrogen abso rp tion capacity up to 1.59%.

rapid quenching method;La-M g-Ni hydrogen storage alloy;hydrogen storage p roperties

TG139.7

A

1673-9981(2011)02-0121-04

2010-11-24

彭能(1980—),男,湖南婁底人,工程師,碩士研究生.