Vol.28,No.1-4,2011

TOTAL CONTENTS

Title Authors No.Page

Accessing High Thermal Efficiency Power Generation Using Fluid Phase Chemical Looping……………………………………Childs Peter R N,McGlashan Niall R,Heyes Andrew L(1-1)

MBDA R&T Effort on Pulsed and Continuous Detonation Wave Engines……………………………………………………………Falempin Francois,Le Naour Bruno(1-12)

Effects of End-Wall Shaping on Steam Turbine Efficiency…………………………………………Hoznedl Michal,Tajc Ladislav,Bednar Lukas,et al(1-23)

Gigacycle Fatigue Behavior of Cast Aluminum in Tension and Torsion Loading………………………………………………………Xue Hongqian,Wu Tieying,Bathias C(1-32)

Numerical Research on Impact of Air System Bleeding on Compressor Performance………………………………………………………Zhao Bin,Li Shaobin,Li Qiushi,et al(1-38)

Numerical Simulation and Analysis of Horseshoe-Shaped Vortex in Near-Wall Region of Turbulent Boundary Layer ………………………………………Shi Wanli,Ge Ning,Chen Lin,et al(1-48)

Detonation Initiation Induced by Flame Implosion and Shock Wave Focusing……………………………………………………………………Qin Yaxin,Yu Junli,Gao Ge(1-57)

Vibration Numerical Analysis of Counter-Rotating Turbine with Wake-Flow Using Fluid-Structure Interaction Method ………………Zhao Zhenhua,L¨uWenliang,Chen Wei,et al(1-66)

Experimental Study of Forced Shock Train Oscillation in Isolator Under Asymmetric Incoming Flow……………………………………………………………………Cao Xuebin,Zhang Kunyuan(1-73)

Recrystallization Behaviors of Alloy IC10 at Elevated Temperature…………………………………………………Zhang Hongjian,Wen Weidong,Cui Haitao(1-81)

Fatigue Life Prediction Method for Impacted Laminates…………………………………………………………Xu Ying,Wen Weidong,Cui Haitao(1-87)

Effect of Fiber Failure on Quasi-Static Unloading/Reloading Hysteresis Loops of Ceramic Matrix Composites ……………………………………………Li Longbiao,Song Yingdong(1-94)

New Technique for Controlling Tip Leakage Flow of Micro Turbine……………………………………………………Cao Chuanjun,Huang Guoping,Xia Chen(1-103)

Research on Matrix Crack Evolution of Cross-Ply Ceramic Matrix Composite………………………………………………Yang Fushu,Sun Zhigang,Li Longbiao,et al(1-112)

Analysis of Internal Waverider Inlet and Typical Sidewall Compression Inlet Performance……………………………………Huang Guoping,Zhu Chengxiang,You Yancheng,et al(1-120)

Prediction of Textile Fabric Reinforced Composite Properties Based on Node Interpolation Cell Method ………………………………………Sun Jie,Song Yingdong,Gao Xiguang,et al(1-129)

Coupling Model of Extended Manufacturing Organization and Its Application……………………………………………………………………Guo Yu,An Bo,Liao Wenhe(1-137)

Test and Control System Development and Application of Landing Gear Drop Test Rig…………………………………………………………Xue Caijun,Qi Wengang,Nie Hong(2-145)

Non-uniform Linear Array Configuration for MIMO Radar……………………………………………………Peng Zhenni,Ben De,Zhang Gong,et al(2-152)

Optimization of Weighted High-Resolution Range Profile for Radar Target Recognition…………………………………………………………Zhu Jiehao,Zhou Jianjiang,Wu Jie(2-157)

Modal Frequency Characteristics of Axially Moving Beam with Supersonic/Hypersonic Speed……………………………………………………Wang Liang,Chen Huaihai,He Xudong(2-163)

Damage Tolerance and Fatigue Life Estimation for Pipe/Rod Bar Structure………………………………………………Dura Hari Bahadur,Wu Tieying,Wu Zhigong(2-169)

Novel Approach to Locator Layout Optimization Based on Genetic Algorithm………………………………………………………Wu Tiejun,Lou Peihuang,Qin Guohua(2-176)

Compensation Control of Real-Time Unbalance Force for Active Magnetic Bearing System……………………………………………………………Gao Hui,Xu Longxiang,Zhu Yili(2-183)

SI-Inspired Energy Aware QoSRouting Tree for WSN…………………………………………………………Huang Ru,Zhu Yu,Miao Peng,et al(2-192)

Analysis of Un-coincide Coordinate Error in Single-Axis Rotating Fiber Optic Strap-Down Inertial Navigation System ……………………Zhang Ling,Lai Jizhou,Liu Jianye,et al(2-199)

Study on Optimization of High Performance Concrete Admixtures……………………………………………………Liu Junlong,Ma Haiyan,Li Qiang,et al(2-206)

Approximation of Interval Bezier Surfaces ………………Huang Lin,Hou Jian,Lai Junf eng(2-211)

Phenolic Antioxidants Determination in Food Items Using Reversed-Phase HPLC………………………………………………………………………Chen Xijin,Zhang Zhicai(2-218)

Effect of Cooling/Lubrication Medium on Machinability of Ti6A14V…………………………………………………………………Qi Baoyun,He Ning,Li Liang(3-225)

Damage Detection for Composite Structure Under Temperature Changes Using Lamb Waves………………………………………………………………………………Yan Gang,Zhou Li(3-231)

ADRC Fractional Order PID Controller Design of Hypersonic Flight Vehicle……………………………………………………Qin Changmao,Qi Naiming,L¨uRui,et al(3-240)

Model of Flight Technical Error in Symmetrical Plane for Performance Based Navigation……………………………………………Zhao Hongsheng,Xu Xiaohao,Zhang Jun,et al(3-246)

Numerical Simulation of Supersonic Axisymmetric Flow over Missile Afterbody with Jet Exhaust Using Positive Schemes… ………………………Zhu Sunke,Ma Dawei,Chen Eryun,et al(3-255)

Causality Diagram Based Safety Analysis of Micro Turbojet Engine……………………………………………………………………Ding Shuiting,Bao Mengyao(3-262)

Spot Beam Judgement Algorithm in LEO Satellite Based on OPNET ……Yu Jia,Zong Peng(3-269)

Flight Delay State-Space Model Based on Genetic EM Algorithm………………………………………………………Chen Haiyan,Wang Jiandong,Xu Tao(3-276)

Auctioning Method for Airspace Congesting Resource Allocation and Game Equilibrium Analysis………………………………………………………………………Liu Fangqin,Hu Minghua(3-282)

Assessment of Military Airfield Obstacle Free Space Based on GIS…………………………………………Luo Chengli,Cai Liangcai,Huang Minghui,et al(3-294)

Solvers for Systems of Large Sparse Linear and Nonlinear Equations Based on Multi-GPUs……………………………………………………Liu Sha,Zhong Chengwen,Chen Xiaopeng(3-300)

Linear Filtering for Vasicek Term Structure Model with Sequentially Correlated Noise………………………………………………………………………………Wu Shu,Liu Sif eng(3-309)

Hybrid Scheme for Compressible Turbulent Flow Around Curved Surface Body………………………………………………………Xu Changyue,Ran Qian,Sun Jianhong(4-315)

Two-Dimensional Stochastic Airfoil Optimization Design Method Based on Neural Networks…………………………………………………………Lin Yu,Wang Heping,Peng Runyan(4-324)

Pre-corrosion Fatigue Notch Factor ………………Zhang Chuan,Yao Weixing,Yu Jianhang(4-331)

Direct Self-repairing Control for Helicopter via Quantum Control and Adaptive Compensator……………………………………………………………Chen Fuyang,Jiang Bin,Tao Gang(4-337)

Singular Perturbation Approach to Moving Mass Control of Buoyancy-Driven Airship in 3-D Space…………………………………………………Wu Xiaotao,Claude H Moog,Hu Yueming(4-343)

Discharge Channel Growth in Micro EDM of High Frequency Pulse……………………………………………………Liu Yu,Wang Jin,Wang Yuangang,et al(4-353)

Characteristics of Fan Stalling Based on Correlated Dimensions………………………………………………………Gu Yongxia,Zhou Zhongning,Li Yimin(4-362)

Volumetric-Swept Display System Based on Helix Rotating Screen and DMD……………………………………………Yue Jian,Zhao Xiaogeng,Xing Jianfang,et al(4-367)

3-D Spidergon:3-D Topology of Delay Optimization for Networks-on-Chip……………………………………………………………………Zhou Lei,Wu Ning,Ge Fen(4-372)

Optimization Design Method for Input Impedance Matching Network of Low Noise Amplifier……………………………………………………………Sun Ling,Wu Xianzhi,Ai Xuesong(4-379)

Modeling and Simulation of E1784K Mutation and Sodium Ionic Channel Diseases…………………………………………………Zhang Wen,Yuan Yongfeng,Kong Shuhan(4-385)

Application Study on Adaptive Neural Fuzzy Inference Model in Complex Social-Technical System………………………………………………………………………Feng Shaohong,Li Dong(4-393)

ACKNOWLEDGEMENT ……………………………………………………………………………(4-400)