亚洲免费av电影一区二区三区,日韩爱爱视频,51精品视频一区二区三区,91视频爱爱,日韩欧美在线播放视频,中文字幕少妇AV,亚洲电影中文字幕,久久久久亚洲av成人网址,久久综合视频网站,国产在线不卡免费播放

        ?

        林業工程學報2021年第6卷總目次

        2021-12-03 19:03:49
        林業工程學報 2021年6期

        專論綜述

        木聚糖衍生物及膜材料研究進展

        彭鋒,饒俊 1(1)

        木材壓縮改性技術研究進展

        涂登云,陳川富,周橋芳,歐榮賢,王先菊 13(1)

        中國智能家具產業現狀與發展趨勢

        熊先青,李榮榮,白洪濤 21(1)

        木質素基碳點和石墨烯量子點制備方法研究進展

        王瑞彬,周雪蓮,徐婷婷,卞輝洋,戴紅旗 29(1)

        仿生超疏水木材表面微納結構制備研究進展

        孫慶豐,楊玉山,黨寶康,陳逸鵬,王媛媛,張佳宜,邱堅 1(2)

        木質素抗紫外輻射性能應用研究進展

        岳鳳霞,林敏生,錢勇,呂發創 12(2)

        連續平壓式熱壓機柔性入口段的結構特征與形式

        陳光偉,陳相宇,花軍,李艷娜,林送峰 21(2)

        木質材料激光表面處理研究進展

        李榮榮,賀楚君,陳瑩靜,孟菲 31(2)

        天然多糖在生物醫用材料領域的應用研究進展

        黃超伯,游朝群,熊燃華,王飛 1(3)

        竹材受彎構件增強技術的研究進展

        魏洋,王志遠,陳思,趙康,丁明珉 9(3)

        木材樹種計算機視覺識別技術發展與應用

        何拓,劉守佳,陸楊,焦立超,殷亞方 18(3)

        無機添加劑改性脲醛樹脂膠黏劑研究進展

        李曉娜,李建章,李炯炯 28(3)

        竹纖維素的制備及其功能化材料研究進展

        陳禮輝,曹石林,黃六蓮,吳慧,胡會超,劉凱,林珊 1(4)

        竹材展平技術研究現狀及展望

        李延軍,婁志超 14(4)

        預處理纖維素超分子結構變化機制研究進展

        凌喆,賴晨歡,黃曹興,許鳳,勇強 24(4)

        木基儲能材料研究新進展

        卿彥,廖宇,劉婧祎,田翠花,許瀚,吳義強 1(5)

        離子液體在木質素解聚領域的應用進展

        馬春慧,孫晉德,李偉,羅沙,劉守新 14(5)

        共擠出成型木塑復合材料研究進展與應用

        郝笑龍,周海洋,孫理超,林東融,歐榮賢,王清文 27(5)

        活性炭深度脫除硫化氫的研究進展

        左宋林,劉斌 1(6)

        生物質基高阻隔復合膜的研究現狀

        王小英,唐淑瑋,吳正國,方家威,覃筱茜,韋嵐升 13(6)

        金屬-有機骨架在生物質及其衍生化學品中的應用

        朱剛,李輝,強明禮,李順艷,康昆勇,徐開蒙,鄧書端 23(6)

        糠醇樹脂改性木材機制的研究進展與思考

        冷魏祺,何盛,張雪峰,翟勝丞,王新洲,潘彪,石江濤 35(6)

        木材科學與技術

        仿生木材結構穿孔纖維板吸聲性能

        賈世芳,劉靜怡,林賢銑,孫偉圣,郭璽,曹惠敏,王文斌 38(1)

        PEI/APP改性脲醛樹脂制備阻燃膠合板及性能

        陸弘毅,張隱,張帥,黃燕萍,潘明珠 44(1)

        竹炭/聚氯乙烯復合板材的性能

        李文珠,章亮,于子絢,張靜,王盟盟,王珊珊,趙磊 50(1)

        預壓縮處理施膠技術提高楊木重組木尺寸穩定性的研究

        林秋琴,張亞梅,于文吉 67(1)

        竹展平板拉伸剪切膠合性能

        劉煥榮,楊曉夢,張秀標,蘇勤,張方達,費本華 68(1)

        ‘72楊’韌皮部的構造與理化性能

        李帆,黃艷輝,葉翠茵,馮啟明 73(1)

        沙柳重組木表面粗糙度的二維和三維分析對比

        林秋琴,黃宇翔,張亞慧,饒飛,于文吉 48(2)

        分子篩前驅體對定向刨花板性能的影響

        張少迪,任自忠,王明枝 49(2)

        冷等離子體和2D樹脂基防護劑對毛竹材的防護效果

        李斌,張健,周曉劍,杜官本 57(2)

        溫度對重組竹短期受壓蠕變性能的影響

        劉嬌,周愛萍,盛寶璐,劉燕燕,孫麗惟 64(2)

        雙擺動貼合的膠合板膩子修補裝置設計及應用

        林志偉,林明山 70(2)

        輕型木結構墻體穩態傳熱性能及其保溫材料影響比較

        張曉鳳,楊茹元,劉芯彤,孫友富 77(2)

        竹單板/泡沫鋁復合材料的制備及膠合性能評估

        肖飛,吳義強,左迎峰,彭亮,李文豪,孫曉東 35(3)

        熱處理毛竹材吸濕與解吸特性

        雷文成,張亞梅,于文吉,余養倫 41(3)

        膠合木人工模擬酸雨和海水老化耐久性能

        楊茹元,吳岳虹,孫友富,張曉鳳,翟偉 47(3)

        早材管孔分布對環孔材櫟木蠕變特性的影響

        尹業橋,侯俊峰,姜志宏,俞友明 54(3)

        熱處理及脫木質素對南方松木材吸濕極限與細胞壁飽和狀態的影響

        李京予,馬爾妮 61(3)

        馬尾松防腐材膠合性能的徑向變異研究

        秦理哲,楊章旗,段文貴,胡拉,徐慧蘭 69(3)

        基于聚苯乙烯微球的木材表面仿生結構色涂層構筑

        胡靜,劉祎,吳智慧,龐小仁 35(4)

        基于木質粉塵燃燒特征光譜的火花探測裝置研究

        尚征帆,張杰,倪申健,徐兆軍,那斌,朱南峰 43(4)

        弱酸改性對高溫熱處理杉木結構及性能的影響

        高義欽,李元元,任瑞清,陳瑤,高建民 49(4)

        酸性藍和活性藍染色竹束工藝與性能比較

        楊思倩,石林,袁少飛,王洪艷,李琴 56(4)

        基于納米壓痕的木材細胞壁力學測量值與加載載荷相關性研究

        蔡紹祥,李延軍,黃燕萍,郭玉良 64(4)

        輕型木結構剪力墻木骨架的抗側性能

        周華,柏潔,文偉,任廷亮,周浩 72(4)

        窯干橡木鋸材的生命周期評價研究

        呂赫,丁濤,程亞飛,江寧 39(5)

        少林寺初祖庵大殿鋪作模型擬靜力試驗

        劉義凡,侯同宇,滕啟城,呂紅醫,李哲瑞,闕澤利 46(5)

        西加云杉木材單寧鐵變色因素及防治

        李茜然,趙雨婷,鄭欣欣,潘彪,王新洲 54(5)

        吸濕循環處理對常用樂器用材聲學振動性能的影響

        余德倩,趙晨鵬,翟勝丞,陳冰煒,闞玉娜,王正 61(5)

        基于Daubechies小波基的木材聲學振動信號分析與評價

        尹玉雪,苗媛媛,萬珂,王秀雅,翟學勇,劉鎮波 68(5)

        竹齡和竹稈縱向部位對青皮竹物理力學性能的影響

        姚開泰,譚偉,周海洋,郝笑龍,許黎明,王清文,歐榮賢 76(5)

        堿蝕改善毛竹條孔隙及染液滲透性研究

        龐曉娜,楊祥,李賢軍,曹敏,楊喜 44(6)

        木質基釔摻雜TiO2薄膜的制備及其光催化性能

        王嘉偉,胡曉洋,李明劍,邵霖治,戰劍鋒 51(6)

        干燥方式對毛竹細胞壁孔隙結構的影響

        曹夢丹,張雪霞,任文庭,朱家偉,王漢坤,徐皓誠,余雁 58(6)

        原料配比對氯氧鎂水泥竹炭板性能的影響

        周海瑛,江文正,李文珠,張文標 66(6)

        中密度纖維板平面立式銑削排屑特征的數值模擬與試驗驗證

        孫勤杰,周曦禾,翁錦萍,李曉旭,周捍東 74(6)

        硅烷偶聯劑KH590對硅酸鹽改性楊木表面性能的影響

        張夢瑩,呂建雄,包新德,李萍,袁光明,左迎峰 82(6)

        真菌對西加云杉木材的感染途徑及其材色和化學成分的影響

        趙洋,任佳,鄭欣欣,潘彪,冷魏祺 88(6)

        林產化學加工

        木材保護用籠型倍半硅氧烷的合成

        王菊琳,張國政,楊孟昕 79(1)

        不同物質的量之比乙二醛-尿素-甲醛共縮聚樹脂的合成與性能

        范恩慶,鄧書端,曹龍,杜官本,康昆勇 86(1)

        雞卵白蛋白-桑葚酒渣花色苷納米顆粒特性

        張麗霞,劉書晶,張晨顏,虞力,范龔健 92(1)

        滇產5種植物精油的抑菌性能及其成分分析

        閆佳,牛延菲,史正軍,雷福厚,趙平,吳春華 98(1)

        銅唑與石蠟防水劑復配處理南方松的耐褐腐性能

        易啟睿,劉敏,侯秉毅,馬爾妮,劉如 101(2)

        西加云杉木材中單寧的提取、分布及組分

        鄭欣欣,趙雨婷,潘彪,王新洲 108(2)

        古建木構件化學組分近紅外光譜分析

        符瑞云,張文博,黎冬青,張厚江 114(2)

        高溫熱處理對桃花心木化學性質的影響

        楊昇,付躍進,晏婷婷,陳媛 120(2)

        柏木醇及其乙酸酯的制備和抗植物病原菌活性研究

        王思禹,劉飛,周倩,徐曙,黃申林,羅金岳 74(3)

        耐熱β-木糖苷酶的可溶性表達及其應用

        羅佳年華,董玉蓉,張珊珊,張小濛,趙林果 81(3)

        墨西哥柏木葉精油含量及組成的季節性變化規律

        王僑,朱凱 88(3)

        亞硫酸氫鎂預處理麥稈木質素磺酸鹽的性質和應用

        劉蕾,任繼巍,劉鑫露,鄭兆娟,李鑫,歐陽嘉 93(3)

        柚木心材和邊材的LC-MS代謝組學比較

        劉李花,劉云,尹加筆,哏玉響寶,李北屏,韓會俊,趙平 100(3)

        油酸甲酯烯烴復分解制備長鏈終端烯烴化學品探究

        舒恒毅,鄭志鋒,劉守慶,何宏舟,黃元波 80(4)

        稀酸稀堿洗脫處理對生物炭結構及吸附四環素性能的影響

        高雅軒,嚴姍姍,林子翔,張書,高雯然 87(4)

        楊木酶水解液培養枯草芽孢桿菌試驗

        游佳欣,應文俊,楊倩倩,廖紅,徐勇,張軍華 94(4)

        南洋楹木材鋸解過程中刺激性氣味的來源及處理

        王婕,徐飛揚,張文豪,周健超,王慧,孫芳利,季曉峰 101(4)

        層次分析-模糊綜合評價法在制漿造紙水污染控制技術評估中的應用

        王敏,尹崇鑫,程金蘭,朱文遠 107(4)

        工況條件對活性炭吸附-脫附CS2的影響

        建曉朋,侯興隆,許偉,劉石彩 114(4)

        水下超疏油紙基材料的制備及其油水分離性能

        樓燕鈴,奚建鋒,蔣珊,吳偉兵 82(5)

        PAM/PEGDA相變儲能導電木膜的制備與表征

        楊娜,張亞楠,蔣建新,劉六軍,段久芳 89(5)

        竹原長纖維制備及其增強聚丙烯復合材料研究

        趙鶴,苗慶顯,黃六蓮,周嚇星,陳禮輝 96(5)

        葡甘露低聚糖的酶法制備及其對腸道微生物的增殖作用

        王蓉,王靜,賴晨歡,黃曹興,凌喆,勇強 104(5)

        乙酸-亞硫酸鹽兩步預處理對楊木木質素吸附纖維素酶的影響

        王金葉,賈麗麗,徐勇,張軍華 111(5)

        半乳甘露聚糖-聚(N-異丙基丙烯酰胺)復合水凝膠的制備與性能

        李琳,趙倩,聞漢康,蔣建新,劉六軍,段久芳 120(5)

        羧甲基化對木聚糖結晶能力及水鑄膜成膜性能的影響

        金旭宸,項舟洋 94(6)

        低共熔溶劑解離木纖維時木質素縮合對纖維素酶解的影響

        余燕燕,李以琳,樓雨寒,劉永壯,于海鵬 101(6)

        N′-取代苯磺?;?N-樟腦磺酰乙二胺化合物的合成及抑菌活性

        岑波,吳光燧,范鐘天,段文貴,林桂汕,張文靜 109(6)

        離子液體固載型大孔樹脂富集刺五加中異嗪皮啶的研究

        馬春慧,羅一貴,李俊含,黃永鑫,姜寧,郭文琪 117(6)

        鐵/木質素納米粒子復合紙的制備及性能

        李穎,童樹華,李瑞芳,戴林,司傳領 123(6)

        PAE樹脂交聯劑pH對大豆膠黏劑結構與性能的影響

        孫宗興,葉仁偉,薦佳琳,宋楠,劉亭,付晴雨,高振華 130(6)

        生物炭功能化g-C3N4光催化劑構筑及催化性能

        邢偉男,程珂,熊若帆,薛櫻涔,韓建剛,吳光瑜 137(6)

        生物質能源與材料

        玉米酒精粕基木材膠黏劑的制備及其性能

        劉崢,寇芙嘉,段雨辰,王瑋嘉,彭來,李建章,高強 105(1)

        利用竹粉制備吸波磁性炭

        李茹,婁志超,顧水祥,王秋怡,劉杰,李延軍 112(1)

        4種富陽竹紙的耐老化性能

        陳彪,譚靜,黃晶,盧郁靜,顧培玲,韓媛,丁延偉 121(1)

        利用熱壓還原法制備3D-W/rGO導電材料

        武靜,王麗,單曉飛,王喜明 84(2)

        丁香酚在生物質半焦催化下的轉化行為

        黃勇,劉沙沙,吳益霜,周建斌,張書 94(2)

        裝備與信息化

        雙尾管脈沖發動機的工作特性

        余兵,許林云,陳青,周宏平,劉鍵 127(1)

        結合深度學習與Hough變換的等長原木材積檢測系統

        林耀海,趙洪璐,楊澤燦,林夢婷 136(1)

        竹子自動定長截斷機的設計與運動協調分析

        張素梅,劉偲,吳小蓮,陳宗霖,黃曉東,林金國 143(1)

        木材靜曲蠕變成套測試系統的研發

        董春雷,保昆雁,黃宇翔,張宏健 147(1)

        結構用集成材自動上下料裝置真空吸附系統設計與試驗

        高銳,張偉,王勇 126(2)

        基于無人機影像與Mask R-CNN的單木樹冠檢測與分割

        黃昕晰,夏凱,馮海林,楊垠暉,杜曉晨 133(2)

        無人機RGB影像中人工林單木位置的提取

        李晨,李佳,王明果,段平,王云川 141(2)

        桉樹爬樹修枝機的設計與測試

        鄭賢,鄧毅,李巖舟,朱欣民 148(2)

        PVC/鈣粉/木纖維復合材料銑削時的機床能量利用率

        董偉航,胡勇,田廣軍,邱學海,郭曉磊 107(3)

        黃麻纖維氈吸聲特性及其在汽車上的應用

        周文璐, 林萍, 徐曉美, 謝宇 113(3)

        基于振動采摘的蘋果樹枝干動力學特性

        劉曉雯,郭彩玲 120(3)

        軟體水果采摘機械手系統設計分析與試驗

        華超,褚凱梅,陳昕,朱銀龍 127(3)

        基于高速攝影的板栗果實振動脫落特性分析

        韓元順,許林云,周杰,余兵 133(3)

        基于YOLOv4的結構用鋸材表面缺陷識別

        王勇,張偉,高銳,金征 120(4)

        基于遺傳-貪心混合搜索的人造板下料算法

        劉誠,孫遠升,花軍,姚嘉明 127(4)

        基于圖像測量的毛竹筍高生長在線監測

        賈新宇,江朝暉,李娟,高健 134(4)

        磨片結構對纖維解離質量及能耗影響分析

        李曉旭,張成旭,花軍,陳光偉 128(5)

        基于機器視覺的實木地板在線分色識別算法

        王錦亞,李振業,倪超 135(5)

        一種輕質電動林業單軌車的設計

        鄭成,徐道春,曹佳樂,李文彬 140(5)

        基于深度學習的松材線蟲病害松木識別

        李浩,方偉泉,李浪浪,陳學永 142(6)

        夜間環境下樹上柑橘表征缺陷深度學習檢測方法

        孫寶霞,梁翠曉,劉凱,鄭鎮輝,胡文馨,熊俊濤 148(6)

        基于雙目視覺的樹木高度測量方法研究

        張真維,趙鵬, 韓金城 156(6)

        森林工程與土建交通

        高水壓大直徑過江隧道盾尾滲漏防治研究

        陳馳,楊平 155(1)

        基于位姿狀態的林區道路視覺導航

        顏松,姚立健,曾松偉,王露露,柴善鵬 163(1)

        基于SLP和SHA的林產品倉儲布局優化

        張永強,李星圓,趙塵 171(1)

        松材線蟲疫木樹蔸銑削過程仿真及優化

        鐘一,楊蹈宇,宋麗娜,稅加坤,孟子銳,李立君 157(2)

        環氧樹脂/木質碎料復合材料力學性能

        趙雙,瞿樹林,曹冰冰,程承,姚順忠 164(2)

        黏性土坡上裙板式條形基礎的極限承載力

        趙志峰,方舟 170(2)

        基于聚類分析法的我國森林火險等級區劃研究

        趙鵬武,武峻毅,張恒 142(3)

        基于物聯網和頻譜分析的林火早期探測技術

        張朔,李雨桐,高德民,管志浩 149(3)

        基于耦合過程的抽水含水層壓縮線性預測方法研究

        呂偉華,楊帥,辛文青,孫信,張繼周,薄冠中 154(3)

        土體含水率和金屬波紋狀表面對界面黏附力影響

        劉成,黃琳,肖宇豪,馬天龍 161(3)

        基于無人機可見光圖像的云杉計數方法

        朱學巖,張新偉,顧夢夢,趙燕東,陳鋒軍 140(4)

        基于飽和度分割的葉面積圖像測量方法

        李秋潔,楊遠明,袁鵬成,薛玉璽 147(4)

        基于改進CornerNet-Lite的林區行人檢測算法

        劉宇航,馬健霄,王羽塵,白瑩佳,謝征俊 153(4)

        下穿車站交疊區域MJS+水平凍結加固解凍溫度場研究

        趙宇輝,楊平,王寧,張玉武 159(4)

        基于無人機多光譜影像的柑橘樹冠分割方法研究

        韓蕊,慕濤陽,趙偉,李丹 147(5)

        基于Mask R-CNN的行道樹實例分割方法

        陸清嶼,李秋潔,童岳凱,王明霞,袁鵬成 154(5)

        盾構對接半圓環形凍結加固結構溫度場數值優化分析

        任軍昊,胡俊,周禹暄,熊輝,林小淇,李珂,王志鑫 161(5)

        高鐵隧道支護參數多目標優化研究

        李浩,王立彬,王飛球,李照眾 169(5)

        多孔瀝青混合料降噪的細觀模擬與宏觀試驗

        孫俊鋒,張海濤,于騰江,劉作強 165(6)

        菌液密封狀態對微生物加固粉土的影響

        王瑋,趙志峰,朱效博 172(6)

        家具制造工程

        水性樹脂底漆對木材表面潤濕性的影響

        路周,胡進波,張默涵,萇姍姍,劉元,鄭磊,李賢軍 178(1)

        SiO2光子晶體制備及其對家具結構色的影響

        楊赟,譚淑娟,方罡,楊芷炎,李永超 184(1)

        家具制造作業體力負荷對認知能力的影響

        洪蓮,于娜 191(1)

        基于動作捕捉、壓力分布和sEMG技術的辦公坐姿舒適性研究

        蘇娜,熱依汗古麗·木沙,木葉賽爾·買買提,李兆波,陶慶 176(2)

        基于人體脊柱形態的床墊舒適性測試與評價方法探討

        劉美,申黎明,盧濤,房嬌嬌,堵夢麗 183(2)

        揚州漆木柜典型度預測方法

        方方,關惠元,盧章平,李明珠 191(2)

        家具制造企業多中心智能制造共享云平臺研究

        劉俊,陳琳,劉潤亞 166(3)

        基于統計過程控制的板式家具封邊工序修邊質量調控

        婁巧蓮,郝景新,吳新鳳,聶鑫磊,孫德林 171(3)

        基于ANSYS的新中式實木椅力學分析

        俞明功,孫德林,鄒偉華,王張恒,姜夏旺,姚令華,孔競 178(3)

        “膚感”涂層形成機制及其在家具中的研究現狀與發展趨勢

        馮鑫浩,陳晶宇,吳智慧,吳燕,甘健 167(4)

        基于感性工學的衣柜造型設計

        胡珊,符凱杰,蔣旭,賈琦,羅亦鳴 176(4)

        基于Workbench的插掛式智能鞋柜設計及分析

        薛興虎,王方艷,楊光,潘永菲 184(4)

        一種面向智能家居設備控制的多模態人機智能交互方法

        邵幫麗,朱寅,朱潤,潘晨曦,王堅,奚雪峰,楊顥 190(4)

        脲醛樹脂包覆氟樹脂微膠囊制備及對木器表面涂層性能的影響

        閆小星,尹太玉,李海紅 176(5)

        一種基于體壓分布和PCA-BP神經網絡模型的辦公椅舒適度測定方法

        晁垚,金倩如,申黎明,談立山,汪洋 183(5)

        TPEE材料力學性能及其對床墊體壓分布的影響

        房嬌嬌,申黎明,陳浩 191(5)

        木質家具智能制造賦能技術及發展路徑分析

        朱劍剛,王旭 177(6)

        木門表面材質的感性意象量化研究與分析

        周橙旻,呂一心,李臻瑜,吳智慧,詹先旭,康明紅 184(6)

        家居用疏水保溫膠合板制備及性能研究

        張雨湉,施江靖,葉交友,陳紅,吳智慧,詹先旭 190(6)

        床墊用垂向變剛度空氣彈簧靜力學特性及其計算模型

        晁垚,申黎明,劉明鵬,張宏玉 197(6)

        (注:頁碼后的括號中數字為各期期號)

        JOURNAL OF FORESTRY ENGINEERING 2021 Vol. 6

        TotalContents

        Special Contribution

        Research progress on xylan derivatives and xylan-based films

        PENG Feng, RAO Jun 1(1)

        Research progress of thermo-mechanical compression techniques for wood products

        TU Dengyun, CHEN Chuanfu, ZHOU Qiaofang, OU Rongxian, WANG Xianju 13(1)

        Research status and development trend of intelligent furniture in China

        XIONG Xianqing, LI Rongrong, BAI Hongtao 21(1)

        Research progress on the preparation of lignin-derived carbon dots and graphene quantum dots

        WANG Ruibin, ZHOU Xuelian, XU Tingting, BIAN Huiyang, DAI Hongqi 29(1)

        Research progress of the preparation of biomimetic superhydrophobic wood surface micro-nano structures

        SUN Qingfeng, YANG Yushan, DANG Baokang, CHEN Yipeng, WANG Yuanyuan, ZHANG Jiayi, QIU Jian 1(1)

        Recent advances of anti-UV radiation of lignin

        YUE Fengxia, LIN Minsheng, QIAN Yong, LYU Fachuang 12(2)

        A review of structure and forms of the flexible infeed of continuous press

        CHEN Guangwei, CHEN Xiangyu, HUA Jun, LI Yanna, LIN Songfeng 21(2)

        Research progress on laser surface treatment of wood materials

        LI Rongrong, HE Chujun, CHEN Yingjing, MENG Fei 31(2)

        Research progress of natural polysaccharide in the application of biomedical materials

        HUANG Chaobo, YOU Chaoqun, XIONG Ranhua, WANG Fei 1(3)

        Research progress of strengthening technology for bamboo flexural members

        WEI Yang, WANG Zhiyuan, CHEN Si, ZHAO Kang, DING Mingmin 9(3)

        Advances and prospects of wood identification technology coupled with computer vision

        HE Tuo, LIU Shoujia, LU Yang, JIAO Lichao, YIN Yafang 18(3)

        Research progress of urea formaldehyde resin modified by inorganic additives

        LI Xiaona, LI Jianzhang, LI Jiongjiong 28(3)

        Development of bamboo cellulose preparation and its functionalization

        CHEN Lihui, CAO Shilin, HUANG Liulian, WU Hui, HU Huichao, LIU Kai, LIN Shan 1(4)

        Progress of bamboo flatten technology research

        LI Yanjun, LOU Zhichao 14(4)

        Research progress in variations of cellulose supramolecular structures via biomass pretreatment

        LING Zhe, LAI Chenhuan, HUANG Caoxing, XU Feng, YONG Qiang 24(4)

        Research progress of wood-derived energy storage materials

        QING Yan, LIAO Yu, LIU Jingyi, TIAN Cuihua, XU Han, WU Yiqiang 1(5)

        Application progress of ionic liquids in the field of lignin depolymerization

        MA Chunhui, SUN Jinde, LI Wei, LUO Sha, LIU Shouxin 14(5)

        Research progress and application of co-extruded wood plastic composites

        HAO Xiaolong, ZHOU Haiyang, SUN Lichao, LIN Dongrong, OU Rongxian, WANG Qingwen 27(5)

        Research progress of hydrogen sulfide deep removal by activated carbon

        ZUO Songlin, LIU Bin 1(6)

        Research status of biomass-based composite films with high barrier properties

        WANG Xiaoying, TANG Shuwei, WU Zhengguo, FANG Jiawei, QIN Xiaoqian, WEI Lansheng 13(6)

        Application and research progress of metal-organic framework materials in biomass and its derived chemicals

        ZHU Gang, LI Hui, QIANG Mingli, LI Shunyan, KANG Kunyong, XU Kaimeng, DENG Shuduan 23(6)

        Research progress and thoughts on the modification mechanism of wood furfurylation

        LENG Weiqi, HE Sheng, ZHANG Xuefeng, ZHAI Shengcheng, WANG Xinzhou, PAN Biao, SHI Jiangtao 35(6)

        Wood Science and Technology

        Sound absorption performance of bionic perforated wood structure fiberboard

        JIA Shifang, LIU Jingyi, LIN Xianxian, SUN Weisheng, GUO Xi, CAO Huimin, WANG Wenbin 38(1)

        Preparation of flame-retardant plywood by PEI/APP modified urea-formaldehyde resin and its properties

        LU Hongyi, ZHANG Yin, ZHANG Shuai, HUANG Yanping, PAN Mingzhu 44(1)

        Study on the performance of functional BC/PVC composites

        LI Wenzhu, ZHANG Liang, YU Zixuan, ZHANG Jing, WANG Mengmeng, WANG Shanshan, ZHAO Lei 50(1)

        Improvement of dimensional stability of poplar scrimber by pre-compression treatment gluing technology

        LIN Qiuqin, ZHANG Yamei, YU Wenji 58(1)

        The tensile shear bonding property of flattened bamboo sheet

        LIU Huanrong, YANG Xiaomeng, ZHANG Xiubiao, SU Qin, ZHANG Fangda, FEI Benhua 68(1)

        Structure and physicochemical property of ‘72 poplar’ phloem

        LI Fan, HUANG Yanhui, YE Cuiyin, FENG Qiming 73(1)

        Measurement of surface roughness ofSalixpsammophilascrimber using stylus profilometer and extended depth-of-field 3D microscope

        LIN Qiuqin, HUANG Yuxiang, ZHANG Yahui, RAO Fei, YU Wenji 40(2)

        Effect of zeolite precursor on properties of oriented strand board

        ZHANG Shaodi, REN Zizhong, WANG Mingzhi 49(2)

        Effects on the protection of bamboo by cold plasma and 2D resin-based protective agent

        LI Bin, ZHANG Jian, ZHOU Xiaojian, DU Guanben 57(2)

        Effect of temperature on short-term compression creep property of bamboo scrimber

        LIU Jiao, ZHOU Aiping, SHENG Baolu, LIU Yanyan, SUN Liwei 64(2)

        Design and application of double swing fitting device for plywood putty repair

        LIN Zhiwei, LIN Mingshan 70(2)

        Comparation of thermal insulation materials and steady state heat transfer performance of light-frame wood structures wall

        ZHANG Xiaofeng, YANG Ruyuan, LIU Xintong, SUN Youfu 77(2)

        Preparation and bonding performance evaluation of bamboo veneer/foam aluminum composites

        XIAO Fei, WU Yiqiang, ZUO Yingfeng, PENG Liang, LI Wenhao, SUN Xiaodong 35(3)

        The adsorption and desorption characteristics of moso bamboo induced by heat treatment

        LEI Wencheng, ZHANG Yamei, YU Wenji, YU Yanglun 41(3)

        Durability of glulam under artificial simulated acid rain and seawater

        YANG Ruyuan, WU Yuehong, SUN Youfu, ZHANG Xiaofeng, ZHAI Wei 47(3)

        Effect of earlywood vessel distribution on creep characteristics of ring-porous oak wood

        YIN Yeqiao, HOU Junfeng, JIANG Zhihong, YU Youming 54(3)

        Influence of heat treatment and delignification on hygroscopicity limit and cell wall saturation of southern pine wood

        LI Jingyu, MA Erni 61(3)

        Radial variation in bonding performance of preservative-treatedPinusmassonianawood

        QIN Lizhe, YANG Zhangqi, DUAN Wengui, HU La, XU Huilan 69(3)

        Construction of bionic structural color coating on wood surface based on polystyrene microspheres

        HU Jing, LIU Yi, WU Zhihui, PANG Xiaoren 35(4)

        Research on spark detection device based on combustion characteristic spectrum of wood dust

        SHANG Zhengfan, ZHANG Jie, NI Shenjian, XU Zhaojun, NA Bin, ZHU Nanfeng 43(4)

        Effect of weak acid modification on the structure and properties of heat-treated Chinese fir

        GAO Yiqin, LI Yuanyuan, REN Ruiqing, CHEN Yao, GAO Jianmin 49(4)

        Comparison of dyeing technology and properties of bamboo bundles dyed by acid blue dyes and reactive blue dyes

        YANG Siqian, SHI Lin, YUAN Shaofei, WANG Hongyan, LI Qin 56(4)

        Study on correlation between mechanical measurement of wood cell wall and added load by nano-indentation

        CAI Shaoxiang, LI Yanjun, HUANG Yanping, GUO Yuliang 64(4)

        Lateral performance of shear wall frame of light timber structure

        ZHOU Hua, BAI Jie, WEN Wei, REN Tingliang, ZHOU Hao 72(4)

        Life cycle assessment of kiln-dried oak lumber

        LYU He, DING Tao, CHENG Yafei, JIANG Ning 39(5)

        Quasi-static experiment on bracket complexes model of the main hall of the ancestor’s monastery in Shaolin Temple

        LIU Yifan, HOU Tongyu, TENG Qicheng, LYU Hongyi, LI Zherui, QUE Zeli 46(5)

        The influence factors and prevention of iron discoloration induced by tannin in thePiceasitchensiswood

        LI Xiran, ZHAO Yuting, ZHENG Xinxin, PAN Biao, WANG Xinzhou 54(5)

        Effect of hygroscopic cycle treatment on acoustic vibration performance of different wood species for musical instruments

        YU Deqian, ZHAO Chenpeng, ZHAI Shengcheng, CHEN Bingwei, KAN Yuna, WANG Zheng 61(5)

        Analysis and evaluation of wood acoustic vibration signal based on Daubechies wavelet base

        YIN Yuxue, MIAO Yuanyuan, WAN Ke, WANG Xiuya, ZHAI Xueyong, LIU Zhenbo 68(5)

        Effects of age and culm longitudinal position on physical and mechanical properties ofBambusatextilisMcClure bamboo

        YAO Kaitai, TAN Wei, ZHOU Haiyang, HAO Xiaolong, XU Liming, WANG Qingwen, OU Rongxian 76(5)

        Improvement of porosity and dye permeability of moso bamboo splints by alkali etching

        PANG Xiaona, YANG Xiang, LI Xianjun, CAO Min, YANG Xi 44(6)

        Preparation of wood-based yttrium doped TiO2film and its photocatalytic properties

        WANG Jiawei, HU Xiaoyang, LI Mingjian, SHAO Linzhi, ZHAN Jianfeng 51(6)

        Effect of drying methods on the cell wall pore structure ofPhyllostachysedulis

        CAO Mengdan, ZHANG Xuexia, REN Wenting, ZHU Jiawei, WANG Hankun, XU Haocheng, YU Yan 58(6)

        Effect of raw material ratio on the properties of magnesium oxychloride cement-bamboo charcoal boards

        ZHOU Haiying, JIANG Wenzheng, LI Wenzhu, ZHANG Wenbiao 66(6)

        Numerical simulation and experiment validation for characteristics of gas-solid flow in chip discharging field with vertical milling on MDF

        SUN Qinjie, ZHOU Xihe, WENG Jinping, LI Xiaoxu, ZHOU Handong 74(6)

        Effect of silane coupling agent KH590 on surface properties of silicate modified poplar

        ZHANG Mengying, LYU Jianxiong, BAO Xinde, LI Ping, YUAN Guangming, ZUO Yingfeng 82(6)

        Effects of three kinds of fungi on color, chemical composition and route of infection ofPiceasitchensis

        ZHAO Yang, REN Jia, ZHENG Xinixn, PAN Biao, LENG Weiqi 88(6)

        Chemical Processing of Forest Products

        Synthesis of cage silsesquioxane for wood protection

        WANG Julin, ZHANG Guozheng, YANG Mengxin 79(1)

        Synthesis and performance of GUF resins with different molar ratios

        FAN Enqing, DENG Shuduan, CAO Long, DU Guanben, KANG Kunyong 86(1)

        Characteristics of chicken ovalbumin-mulberry wine pomace anthocyanin nanoparticles

        ZHANG Lixia, LIU Shujing, ZHANG Chenyan, YU Li, FAN Gongjian 92(1)

        The mold inhibitory properties and composition analysis of five plant essential oils produced in Yunnan

        YAN Jia, NIU Yanfei, SHI Zhengjun, LEI Fuhou, ZHAO Ping, WU Chunhua 98(1)

        Brown rot resistance of southern pine by combined treatment of copper azole and waterproof paraffin emulsion

        YI Qirui, LIU Min, HOU Bingyi, MA Erni, LIU Ru 101(2)

        Extraction, distribution and composition of tannin inPiceasitchensis

        ZHENG Xinxin, ZHAO Yuting, PAN Biao, WANG Xinzhou 108(2)

        Analyses on chemical composition of ancient wood structural component by using near infrared spectroscopy

        FU Ruiyun, ZHANG Wenbo, LI Dongqing, ZHANG Houjiang 114(2)

        Effect of high temperature heat-treatment on the chemical properties ofSwieteniamacrophylla

        YANG Sheng, FU Yuejin, YAN Tingting, CHEN Yuan 120(2)

        Preparation of cedrol and cedryl acetate and their antifungal activities

        WANG Siyu, LIU Fei, ZHOU Qian, XU Shu, HUANG Shenlin, LUO Jinyue 74(3)

        Soluble expression and applications of thermostableβ-xylosidase

        LUO Jianianhua, DONG Yurong, ZHANG Shanshan, ZHANG Xiaomeng, ZHAO Linguo 81(3)

        Study on the seasonal variation law of the essential oil content and composition ofCupressuslusitanice

        WANG Qiao, ZHU Kai 88(3)

        Properties and applications of lignosulfonate from wheat straw spent liquor pretreated by magnesium bisulfite

        LIU Lei, REN Jiwei, LIU Xinlu, ZHENG Zhaojuan, LI Xin, OUYANG Jia 93(3)

        Comparative metabolomics analysis on heartwood and sapwood components of teak (Tectonagrandis)

        LIU Lihua, LIU Yun, YIN Jiabi, GEN Yuxiangbao, LI Beiping, HAN Huijun, ZHAO Ping 100(3)

        Process optimization and mechanism of substrate on preparation high-carbon terminal-olefin compounds through cross-metathesis of methyl oleate

        SHU Hengyi, ZHENG Zhifeng, LIU Shouqing, HE Hongzhou, HUANG Yuanbo 80(4)

        Effects of the washing treatment using diluted acid and base on the structure of biochar and its adsorption performance on tetracycline

        GAO Yaxuan, YAN Shanshan, LIN Zixiang, ZHANG Shu, GAO Wenran 87(4)

        The production ofBacillussubtilisby fermentation from enzymatic hydrolysate of poplar

        YOU Jiaxin, YING Wenjun, YANG Qianqian, LIAO Hong, XU Yong, ZHANG Junhua 94(4)

        A preliminary study on the irritation odor source ofAlbiziafalcatariaduring sawing and its relieving treatment by extraction

        WANG Jie, XU Feiyang, ZHANG Wenhao, ZHOU Jianchao, WANG Hui, SUN Fangli, JI Xiaofeng 101(4)

        Application of AHP-FCE evaluation on the pulping and papermaking water pollution control technology

        WANG Min, YIN Chongxin, CHENG Jinlan, ZHU Wenyuan 107(4)

        Study on the adsorption and desorption of CS2on activated carbon under different operating conditions

        JIAN Xiaopeng, HOU Xinglong, XU Wei, LIU Shicai 114(4)

        Underwater superoleophbic paper-based materials and their oil-water separation performance

        LOU Yanling, XI Jianfeng, JIANG Shan, WU Weibing 82(5)

        Preparation and characterization of PAM/PEGDA phase change energy storage conductive wood films

        YANG Na, ZHANG Yanan, JIANG Jianxin, LIU Liujun, DUAN Jiufang 89(5)

        Preparation of long bamboo fiber and its reinforced polypropylene membrane composites

        ZHAO He, MIAO Qingxian, HUANG Liulian, ZHOU Xiaxing, CHEN Lihui 96(5)

        Enzymatic preparation of glucomannan oligosaccharides and their effects on intestinal microbial proliferation

        WANG Rong, WANG Jing, LAI Chenhuan, HUANG Caoxing, LIN Zhe, YONG Qiang 104(5)

        Effect of acetic acid-sulfite two-step pretreatment on the adsorption of poplar lignin toward cellulase

        WANG Jinye, JIA Lili, XU Yong, ZHANG Junhua 111(5)

        Preparation and performance of galactomannan temperature-sensitive hydrogels

        LI Lin, ZHAO Qian, WEN Hankang, JIANG Jianxin, LIU Liujun, DUAN Jiufang 120(5)

        Crystallization ability and water cast film formability of carboxymethylated xylan

        JIN Xuchen, XIANG Zhouyang 94(6)

        Effect of lignin condensation on cellulose enzymatic hydrolysis during deep eutectic solvent fractionation of lignocellulose

        YU Yanyan, LI Yilin, LOU Yuhan, LIU Yongzhuang, YU Haipeng 101(6)

        Synthesis and antifungal activity ofN′-substituted benzenesulfonyl-N-camphorsulfonyl-ethylenediamine compounds

        CEN Bo, WU Guangsui, FAN Zhongtian, DUAN Wengui, LIN Guishan, ZHANG Wenjing 109(6)

        Study on the enrichment of isoxaziridin fromAcanthopanaxsenticosusby macroporous resin immobilized with ionic liquid

        MA Chunhui, LUO Yigui, LI Junhan, HUANG Yongxin, JIANG Ning, GUO Wenqi 117(6)

        Preparation and properties of Fe/lignin nanoparticle composite paper

        LI Ying, TONG Shuhua, LI Ruifang, DAI Lin, SI Chuanling 123(6)

        Effect of pH of PAE resin on the structure and properties of soybean adhesive

        SUN Zongxing, YE Renwei, JIAN Jialin, SONG Nan, LIU Ting, FU Qingyu, GAO Zhenhua 130(6)

        Study on biochar functionalized g-C3N4photocatalyst towards improved photocatalytic degradation performance

        XING Weinan, CHENG Ke, XIONG Ruofan, XUE Yingcen, HAN Jiangang, WU Guangyu 137(6)

        Biomass Energy and Material

        Preparation and investigation of distillers-dried grains with solubles-based wood adhesive

        LIU Zheng, KOU Fujia, DUAN Yuchen, WANG Weijia, PENG Lai, LI Jianzhang, GAO Qiang 105(1)

        Preparation of magnetic carbon with microwave absorption property using bamboo powder

        LI Ru, LOU Zhichao, GU Shuixiang, WANG Qiuyi, LIU Jie, LI Yanjun 112(1)

        Research on the aging-resistance properties of four kinds of Fuyang bamboo paper

        CHEN Biao, TAN Jing, HUANG Jing, LU Yujing, GU Peiling, HAN Yuan, DING Yanwei 121(1)

        Preparation of 3D-W/rGO conductive materials by hot-pressing reduction method

        WU Jing, WANG Li, SHAN Xiaofei, WANG Ximing 84(2)

        Catalytic conversion of eugenol over bio-char

        HUANG Yong, LIU Shasha, WU Yishuang, ZHOU Jianbin, ZHANG Shu 94(2)

        Forestry Equipment and Information

        Experimental study on the working characteristics of pulse-jet engine with twin exhaust pipe

        YU Bing, XU Linyun, CHEN Qing, ZHOU Hongping, LIU Jian 127(1)

        An equal length log volume inspection system using deep-learning and Hough transformation

        LIN Yaohai, ZHAO Honglu, YANG Zecan, LIN Mengting 136(1)

        Design of automatic cut-off machine with selected length to bamboo and analysis of corresponding movement

        ZHANG Sumei, LIU Cai, WU Xiaolian, CHEN Zonglin, HUANG Xiaodong, LIN Jinguo 143(1)

        Research and development of testing system for static bending creep of wood

        DONG Chunlei, BAO Kunyan, HUANG Yuxiang, ZHANG Hongjian 147(1)

        Design and test of the automatic loading and unloading vacuum adsorption device for glue-laminated timber

        GAO Rui, ZHANG Wei, WANG Yong 126(2)

        Research on individual tree crown detection and segmentation using UAV imaging and Mask R-CNN

        HUANG Xinxi, XIA Kai, FENG Hailin, YANG Yinhui, DU Xiaochen 133(2)

        Individual tree position extraction of an artificial forest area in UAV RGB image

        LI Chen, LI Jia, WANG Mingguo, DUAN Ping, WANG Yunchuan 141(2)

        Design and experiment of pruning machine for eucalyptus trees

        ZHENG Xian, DENG Yi, LI Yanzhou, ZHU Xinmin 148(2)

        Machine energy utilization rate during milling of PVC/calcium powder/wood fiber composites

        DONG Weihang, HU Yong, TIAN Guangjun, QIU Xuehai, GUO Xiaolei 107(3)

        Sound absorption characteristics of the jute fiber felt and its application in automobiles

        ZHOU Wenlu, LIN Ping, XU Xiaomei, XIE Yu 113(3)

        Study on dynamic characteristics of apple tree branches based on vibration picking

        LIU Xiaowen, GUO Cailing 120(3)

        Design, analysis and experimental study of soft picking manipulator system for fruit harvesting

        HUA Chao, CHU Kaimei, CHEN Xin, ZHU Yinlong 127(3)

        Analysis of chestnut fruit shedding characteristics by vibration using high-speed videos

        HAN Yuanshun, XU Linyun, ZHOU Jie, YU Bing 133(3)

        Research on surface defect recognition of structural sawn timber using YOLOv4

        WANG Yong, ZHANG Wei, GAO Rui, JIN Zheng 120(4)

        Cutting of wood-based panel based on genetic greedy hybrid search

        LIU Cheng, SUN Yuansheng, HUA Jun, YAO Jiaming 127(4)

        On-line monitoring of bamboo shoot growth height based on image measurement

        JIA Xinyu, JIANG Zhaohui, LI Juan, GAO Jian 134(4)

        Analysis on influence of refining disk structure on fiber dissociation quality and energy consumption using heat transfer theory

        LI Xiaoxu, ZHANG Chengxu, HUA Jun, CHEN Guangwei 128(5)

        Machine vision algorithms of online color recognition and classification for solid wood flooring products

        WANG Jinya, LI Zhenye, NI Chao 135(5)

        Design of lightweight electric forestry monorail vehicle

        ZHENG Cheng, XU Daochun, CAO Jiale, LI Wenbin 140(5)

        Recognition of pine wood infected with pine nematode disease based on deep learning

        LI Hao, FANG Weiquan, LI Langlang, CHEN Xueyong 142(6)

        Fluorescence detection of citrus characterization defects using SVM

        SUN Baoxia, LIANG Cuixiao, LIU Kai, ZHENG Zhenhui, HU Wenxin, XIONG Juntao 148(6)

        Research on measurement method of single tree height using binocular vision

        ZHANG Zhenwei, ZHAO Peng, HAN Jincheng 156(6)

        Forest Engineering and Civil Engineering

        Study on the prevention and control for shield tail leakage of large-diameter river-crossing tunnel at high hydraulic pressure

        CHEN Chi, YANG Ping 155(1)

        Visual navigation of forest road based on pose state

        YAN Song, YAO Lijian, ZENG Songwei, WANG Lulu, CHAI Shanpeng 163(1)

        Optimization of storage layout of forest products based on SLP and SHA

        ZHANG Yongqiang, LI Xingyuan, ZHAO Chen 171(1)

        Milling process simulation and optimization of pine stump infected byBursaphelenchusxylophilus

        ZHONG Yi, YANG Daoyu, SONG Lina, SHUI Jiakun, MENG Zirui, LI Lijun 157(2)

        Mechanical properties of epoxy resin/wood chips composite

        ZHAO Shuang, QU Shulin, CAO Bingbing, CHENG Cheng, YAO Shunzhong 164(2)

        Ultimate bearing capacity computation of skirted strip footing on the cohesive soil slope

        ZHAO Zhifeng, FANG Zhou 170(2)

        Study on forest fire risk classification in China using cluster analysis

        ZHAO Pengwu, WU Junyi, ZHANG Heng 142(3)

        Research on early forest fire detection based on the internet of things and spectrum analysis

        ZHANG Shuo, LI Yutong, GAO Demin, GUAN Zhihao 149(3)

        Study on linear prediction method of pumped aquifer compression based on coupling process

        LYU Weihua, YANG Shuai, XIN Wenqing, SUN Xin, ZHANG Jizhou, BO Guanzhong 154(3)

        Experimental study on the influence of soil moisture content and metal corrugated surface on the interfacial adhesion

        LIU Cheng, HUANG Lin, XIAO Yuhao, MA Tianlong 161(3)

        Spruce counting method based on UAV visible images

        ZHU Xueyan, ZHANG Xinwei, GU Mengmeng, ZHAO Yandong, CHEN Fengjun 140(4)

        Image measurement method of leaf area based on saturation segmentation

        LI Qiujie, YANG Yuanming, YUAN Pengcheng, XUE Yuxi 147(4)

        Forest-pedestrian detection algorithm based on improved CornerNet-Lite

        LIU Yuhang, MA Jianxiao, WANG Yuchen, BAI Yingjia, XIE Zhengjun 153(4)

        Study on MJS+horizontal freezing reinforcement and thawing temperature field in the overlapped area of the underpass station

        ZHAO Yuhui, YANG Ping, WANG Ning, ZHANG Yuwu 159(4)

        Research on citrus canopy segmentation method based on UAV multispectral image

        HAN Rui, MU Taoyang, ZHAO Wei, LI Dan 147(5)

        Instance segmentation method of street trees based on Mask R-CNN

        LU Qingyu, LI Qiujie, TONG Yuekai, WANG Mingxia, YUAN Pengcheng 154(5)

        Numerical optimization analysis of temperature field of semi-circular ring shaped frozen reinforced structure in shield butt joint

        REN Junhao, HU Jun, ZHOU Yuxuan, XIONG Hui, LIN Xiaoqi, LI Ke, WANG Zhixin 161(5)

        Research on multi-objective optimization of support parameters of high-speed railway tunnel

        LI Hao, WANG Libin, WANG Feiqiu, LI Zhaozhong 169(5)

        Meso simulation and macro experimental study of noise reduction in porous asphalt mixtures

        SUN Junfeng, ZHANG Haitao, YU Tengjiang, LIU Zuoqiang 165(6)

        Influences of bacteria solution sealing state on the reinforcement of silt by bio-cementation

        WANG Wei, ZHAO Zhifeng, ZHU Xiaobo 172(6)

        Furniture Design and Manufacturing

        Research on wettability of wood surface with waterborne-resin priming paint

        LU Zhou, HU Jinbo, ZHANG Mohan, CHANG Shanshan, LIU Yuan, ZHENG Lei, LI Xianjun 178(1)

        Preparation of SiO2photonic crystal and its effect on furniture structural color

        YANG Yun, TAN Shujuan, FANG Gang, YANG Zhiyan, LI Yongchao 184(1)

        Effect of physical load on cognitive ability in furniture manufacturing

        HONG Lian,YU Na 191(1)

        Comparison of sitting postures based on motion capture, pressure distribution and sEMG for finding the optimal sitting posture

        SU Na, REYIHANGULI Musha, MUYESAIER Maimaiti, LI Zhaobo, TAO Qing 176(2)

        Investigation on the test and evaluation methods of health and comfort performance of mattress based on human spine shape

        LIU Mei, SHEN Liming, LU Tao, FANG Jiaojiao, DU Mengli 183(2)

        Typicality prediction method study of Yangzhou lacquered cabinets

        FANG Fang, GUAN Huiyuan, LU Zhangping, LI Mingzhu 191(2)

        Research on multi-center intelligent manufacturing sharing cloud platform of furniture manufacturing enterprises

        LIU Jun, CHEN Lin, LIU Runya 166(3)

        Improvement of panel edge sealing quality during trimming using statistical process control technology

        LOU Qiaolian, HAO Jingxin, WU Xinfeng, NIE Xinlei, SUN Delin 171(3)

        Mechanical analysis of new Chinese style wood chairs using ANSYS

        YU Minggong, SUN Delin, ZOU Weihua, WANG Zhangheng, JIANG Xiawang, YAO Linghua, KONG Jing 178(3)

        The formation mechanism of “skin-tactile” coating and its application and trends in furniture

        FENG Xinhao, CHEN Jingyu, WU Zhihui, WU Yan, GAN Jian 167(4)

        The design of closet styling based on Kansei Engineering

        HU Shan, FU Kaijie, JIANG Xu, JIA Qi, LUO Yiming 176(4)

        Design and analysis of plug-in intelligent shoe cabinet based on ANSYS Workbench

        XUE Xinghu, WANG Fangyan, YANG Guang, PAN Yongfei 184(4)

        Multi-modal man-machine intelligent interaction approach for smart home equipment control

        SHAO Bangli, ZHU Yin, ZHU Run, PAN Chenxi, WANG Jian, XI Xuefeng, YANG Hao 190(4)

        Preparation of urea-formaldehyde resin coated fluororesin microcapsules and its effect on the performance of water-borne coatings on wood surfaces

        YAN Xiaoxing, YIN Taiyu, LI Haihong 176(5)

        A method for measuring the comfort of office chair based on body pressure distribution and PCA-BP neural network model

        CHAO Yao, JIN Qianru, SHEN Liming, TAN Lishan, WANG Yang 183(5)

        Mechanical properties of TPEE and its influence on pressure distribution of mattress

        FANG Jiaojiao, SHEN Liming, CHEN Hao 191(5)

        Research on enabling technologies and development path of intelligent manufacturing of wooden furniture

        ZHU Jiangang, WANG Xu 177(6)

        Quantitative analysis of perceptual images of wooden door surface materials

        ZHOU Chengmin, LYU Yixin, LI Zhenyu, WU Zhihui, ZHAN Xianxu, KANG Minghong 184(6)

        Preparation and performance of hydrophobic thermal insulation plywood for household

        ZHANG Yutian, SHI Jiangjing, YE Jiaoyou, CHEN Hong, WU Zhihui, ZHAN Xianxu 190(6)

        Static characteristics and calculation model of air spring with vertical variable stiffness for mattress

        CHAO Yao, SHEN Liming, LIU Mingpeng, ZHANG Hongyu 197(6)

        好爽受不了了要高潮了av| 欧美老妇多毛xxxxx极瑞视频| a级特黄的片子| 国产真实露脸4p视频| 日本看片一区二区三区| AV无码免费不卡在线观看| 国产三级在线观看不卡| 不卡的av网站在线观看| 熟女少妇在线视频播放| 最新国产午夜福利| 日本一区二区高清视频| 久久综合久久美利坚合众国| 中国国语毛片免费观看视频| 欧洲亚洲第一区久久久| 亚洲一区域二区域三区域四| 日本韩国男男作爱gaywww| 久久九九久精品国产| 456亚洲人成在线播放网站| 宅男天堂亚洲一区二区三区| 浪货趴办公桌~h揉秘书电影| 又黄又爽又高潮免费毛片| 国产av无码专区亚洲aⅴ| 国产剧情av麻豆香蕉精品| 日本精品无码一区二区三区久久久| 国产精品视频牛仔裤一区| 日韩精品成人一区二区三区久久久| 免费亚洲老熟熟女熟女熟女| 人妻激情另类乱人伦人妻| 2021av在线| 国产日产高清一区二区三区| 亚洲av无码一区东京热| 久久久久无码国产精品不卡| 成年毛片18成年毛片| 日韩少妇人妻中文视频| 国产sm调教视频在线观看| 久久精品国产热久久精品国产亚洲| 大尺度极品粉嫩嫩模免费| 轻点好疼好大好爽视频| 自拍偷拍亚洲一区| 日本在线观看一区二区三区视频| 少妇高潮惨叫久久久久电影69|