謝凡　黃志亮　張云飛　鄧習樹

摘 要：某型工程車輛，在可靠性試驗過程中，驅動橋橋殼若為沖焊結構，會經常從推力桿支座焊縫位置開裂，影響試驗效率。對橋殼進行試驗研究發現平衡懸架結構在搓衣板路上存在低頻“拍擊”附加力，并會引起簧上共振，使推力桿座焊縫位置的應力異常增大，容易產生裂紋。

關鍵詞：驅動橋 平衡懸架 低頻附加力 簧上共振

Experimental Study on Load Bearing Capacity of Drive Axle Housing

Xie Fan，Huang Zhiliang，Zhang Yunfei，Deng Xishu

Abstract：During the reliability test of a certain type of engineering structure， if the drive axle housing is a punching and welding structure， it will often crack from the weld position of thrust rod support， which affects the test efficiency. The experimental study on the axle housing shows that there is a low-frequency “slapping” additional force of the balanced suspension when running on the washboard， which causes the spring resonance and makes the stress of the thrust rod seat weld abnormal increase， and produce cracks easily.

Key words：drive axle， balanced suspension， low-frequency additional force， spring resonance