Xuefang Xiao, Zewang Zhang and Xiupu Zhang

(1. School of Opto-electronic and Communication Engineering, Xiamen University of Technology, Xiamen 361024, Fujian,China;2. Key Laboratory of Communication Network and Information Processing in Fujian Province, Xiamen 361024, Fujian,China;3. Photonics Labs., Department of Electrical and Computer Engineering, Concordia University, Montreal QC H3G 1M8, Canada)

Abstract: The optical feedback modulations of a passively mode-locked semiconductor laser with quantum dot structure were investigated in this study.The delay-induced dynamics of QD MLL under the condition of optical feedback have been studied by exploiting a time domain traveling wave(TDTW)model.The conventional TDTW model was improved to make it suitable for studying optical feedback system, especially the system with long external cavity structure.Combing the TDTW model with optical feedback and carrier rate equations, the pulse variation of a single section QD MLL was studied.This new model shows good agreement with the published experimental data.The roundtrip time and local light intensity modulation to the pulse evolution of QD MLL were studied.The results show that when the time for a light to go to and return from external cavity is equal to the integral times of the period of laser pulse without external feedback, resonance will be formed, and the period of pulse sequence is the shortest.The results also show that the stronger the local light intensity modulation is, the shorter the pulse period is.

Keywords: quantum dot structure; passively mode-locked laser; optical feedback

0 Introduction

It is hoped that the ultrashort pulses excited by semiconductor lasers are tunable and pulse frequencies far exceed the direct modulation limit[1-3].Ultrashort pulses can be widely used in optical switches, optical interconnection[4], photoelectric sampling[5], material fabrication, and optical coherence tomography[6].Semiconductor mode-locked lasers(SLLs), especially those with quantum dot structure, have maintained a sustained growth momentum, and have become a research hot spot in the past decade.

Quantum dot mode-locked lasers(QD MLLs)usually have two types of structures: one is two section type, the other is single-section type.The two-section structure has two parts: gain and saturation absorber.For two-section mode-locked semiconductor lasers, mode-locking can be obtained using various external cavity structures, such as basic mirror optical feedback[7-10], photoelectric feedback[11]in the saturated absorption region, hybrid mode modulation[12], non-impact cavity structure[13]in the position of saturable absorber in the cavity, controlling the temperature of the laser, and working at low temperature[14].For single-section mode-locked semiconductor lasers, the results of material growth and device development are reported in Refs.[15-18].Compared with two-section devices, there is less work on external modulation of one-section devices, and the method is relatively simple, mainly focusing on optical feedback[19-20].

Travelling-wave(TW)model and delayed differential equation(DDE)model are two popular methods to analyze the propagation dynamics of the electromagnetic waves in semiconductor lasers and feedback systems[21-23].Rossetti et al.[24]proposed a TDTW model for the analysis of two-section QD MLLs in 2011, and then the model was modified and successfully applied to the study of the one-section QD MLLs[25], QD Fabry-Perot lasers[26], and QD DFB lasers[27].

The TDTW model can describe the dynamic behavior of the device more accurately by solving the one-dimensional wave equation and carrier rate equation in the cavity in time domain.In DDE model, a unidirectional annular cavity is assumed.By introducing appropriate approximation, the delay differential equation is derived from the fundamental wave equation.Compared with TW model, the computational complexity is greatly reduced.There are plenty of experimental results about optical feedback in QD MLLs, but only a few theoretical studies are reported.In practical experiments, long optical fiber is often used to provide optical feedback, so the study of long external cavity has greater value.However, the TDTW model studies the long external cavity, which means a sharp increase in the amount of calculation.Therefore, DDE model is commonly used in optical feedback research[23,28].There are few reports on optical feedback of TDTW model.

To depict the dynamic behavior of the device more accurately, this paper studied and analyzed the Rossi’s TDTW model, and obtained a new model for the study of optical feedback in single section QD MLLs.This new model overcomes the problem that the calculation of TDTW model increases greatly when the optical feedback of long external cavity is introduced.The pulse trains of QD MLLs with and without optical feedback were simulated.In addition, the influence of round-trip time and local modulation intensity on the period of the optical pulse were studied.

1 Theoretical Model

The block diagram of optical feedback system is given in Fig.1, and the reflectivity at three boundaries is noted.In the figure, the rectangle on the left represents QD MLL and the rightmost rectangle represents Bragg grating with a central wave number ofβ0.When the length of the external cavity is much larger than that of the grating, the length of the grating is ignored.The cavity length of QD MLL isLand the external cavity length isLextand the loss caused by each optical element of external cavity isrext.Fig.2 shows an equivalent structure for Fig.1, in which optical feedback cavity is modelled by an effective reflectivityreff.

Fig.1 Structure of QD MLL with an external cavity

Fig.2 Equivalent structure of QD MLL with an external cavity

The coupled wave equation was used to display the spatial-temporal behavior of the electromagnetic field including the feedback from external cavity as follows[24]:

(1a)

(1b)

whereE±(z,t)are slowly varying forward(+)and backward(-)traveling mode field amplitudes,vgis group-velocity,αiis the intrinsic waveguide loss, andP±(z,t)is the modified polarization for each forward(+)/backward(-)propagation, respectively.In this paper, the imaginary number unit is represented by j.S±(z,t)is spontaneous emission noise,tis the transmission time, andzis the position of transmission, respectively.Take optical feedback as an injection term, whereτis the roundtrip time.The term AT was used to take into account the optical feedback intensity regulating factor related to transmission loss, which is one if the loss in transmission is ignored.

Since the length of the QD laser is negligible compared with that of the outer cavity, the difference of feedback in different positions of the internal cavity is ignored.So Eq.(1)can be modified into

(2a)

(2b)

Based on mode-locking behavior of periodic pulses,E(z,t)must be periodically distributed in the time domain.LetTintbe the period of the QD laser without feedback.Whenτis equal to an integer multiple ofTint, there isf·E±(z,t-τ)=f·E±(z,t).Whenτis not equal to an integer multiple ofTint, there isτ=nTint+δ, wherenis an integer, and

Based on the aforementioned analysis, Eq.(2)is transformed into frequency domain, and the following expression is obtained:

(3a)

(3b)

(4)

where matricesMδandMgare expressed respectively as

(5a)

(5b)

In Eq.(5b), whenδis small enough, the first order Taylor expansion offe-jωδatω0which isf(1-jδω0)can be used, and Eq.(5b)can be given by

(5c)

For a given small step Δz, Eq.(4)is simplified into

(6)

The numerical solution of Eq.(6)can be approximated as

(7)

whereγ=jf(1-jδω0), and when Δzis small enough, ek(z,ω)△z≈1-k(z,ω)Δzis obtained.Now adding the spontaneous emission noise with a step of Δz, Eq.(7)is rewritten as

(8a)

E-(z-Δz,t+Δt)=jtanh(γΔz)(E+(z-Δz,t)-

jP-(z,t)Δz)+S-(z,t)Δz

(8b)

The boundary conditions for Eq.(8)are as follows:

E+(0,t)=rrE-(0,t)

(9a)

E+(L,t)=reffE-(L,t)

(9b)

Optical feedback makes the local optical intensity modulated, which in turn modulates the gain[30].So each QD population’s contribution to the whole effective polarization is defined as follows(see Appendix):

(10)

whereΓxyis the field confinement factor in the QD laser,NDis the QD surface density,AGSis the coefficient of the interband transition matrix element containing the GS(ground state)transition,DGSis the degeneracy of GS QD states,hWis the quantum well(QW)width,ρiGSis the carrier occupation probability,ε1andε2refer to the local intensity modulation intensity coefficients caused by the optical feedback intensity and grating structure respectively,β0is the central wave numbers in Bragg grating,φis the relative phase difference betweenE+andE-.In this paper,φ=0 andβ0=ω0/care set.

The detailed expressions forIim±(z,t)andP±(z,t)can be found in Ref.[24]:

(11a)

and

(11b)

The carrier density rate equations in the feedback system are given in Ref.[25]:

(12a)

(12b)

(12c)

The time dynamics of the feedback system can be presented by solving Eqs.(8)-(12)iteratively.

According to Ref.[25], the self-focusing effect leading to mode locking can be expressed in our model as follows:

(13)

where |E+(L,t)|2is the laser intensity under normalized conditions,s0is the unsaturated loss, andIsatis saturation intensity of the QD laser.The values ofs0andIsatused in the paper are 0.35 and 0.16 W, respectively.

2 Results and Discussion

The time-domain dynamic of the one section QD MLLs was studied by using the model.The calculated results were compared with the test data in Ref.[31], and the simulation model parameters are given in Table 1.

Table 1 Simulation Parameters

A comparison between the measured curve and the calculated curve is depicted in Fig.3 for the QD MLL without optical feedback.It can be seen from the figure that the simulated data are in good agreement with experimental data.The periodic time is 20 ps, the pulse width(FWHM)of simulation results is 200 fs, and the FWHM of the experiment results is 295 fs.The disagreement between simulation and experimental data can be attributed to the influence of group velocity, which is not considered.

Fig.3 Optical pulse trains without optical feedback

Fig.4 shows the simulation result with optical feedback.In Ref.[31], 8 fiber Bragg gratings with the same frequency interval were used to carry out optical feedback experiments.The experimental results showed that when the QD MLL with a pulse period of 20 ps was introduced into the external cavity, and the periodic pulse of 2.29 ps was obtained.In this paper, let parameterδ=0 andε1=ε2=2.3, the periodic time is 2.3 ps, which is consistent with the experimental data.

Fig.4 Optical pulse trains with optical feedback

Figs.5(a)-(c)depict optical intensity pulse whileτis not an integral multiple ofTint, andδ= 10-14, 1.4×10-14, and 10-13s were considered.It can be seen that with the increase of offsets, the pulses are more distorted.This may be due to the competition between the feedback pulse sequence and the laser generated pulse sequence with the increase of offset, resulting in the increase of noise and pulse distortion.Compared with Fig.3 and Fig.4, the period of the pulse is the shortest whenτ=nTint.The studies in Fig.4 and Fig.5 show that optical feedback can cause stable or unstable pulse effects.Whenτ=nTint, the pulse propagation in the outer cavity matches the pulse in the QDMLL perfectly, forming resonance and obtaining stable pulse effect.At this time, the period of the pulse is the shortest and the frequency of the pulse increased the most.This frequency pulling caused by feedback has been verified in the experiment[3,7-8].The DDE model was used to study the optical feedback in Ref.[23], and the conclusion of frequency pulling caused by optical feedback was also obtained.Whenδ=10-13, the pulse propagation in the outer cavity and the pulse in the QD MLL could not form resonance, resulting in the instability of the pulse.

Fig.5 Optical intensity pulse trains with different δ

Fig.6 shows the impact of local optical intensity modulated coefficientε1andε2, where two cases were considered:ε1=ε2=2.1 and 2.5.With the increase ofε1andε2, the pulse period was shortened more.The gain modulation effect caused by optical feedback was studied as shown in Fig.6.It is considered that the optical feedback will cause the inhomogeneous distribution of photons in the direction of propagation, which makes the carriers almost completely confined in the quantum dots, and further inhibit the carriers diffusion along the waveguide, thus suppressing the gain.The larger theε1andε2are, the stronger the suppression effect is, and the shorter the pulse period caused by feedback is.

Fig.6 Optical intensity pulse trains with different ε1 and ε2

3 Conclusions

A TDTW model of single-section QD mode-locked lasers with optical feedback has been proposed.The influence of external cavity round trip time on the pulse sequence was researched.Further, the influence of local light intensity modulation caused by feedback on pulse period was studied.The simulated pulse was consistent with experimental results.The optical feedback term was introduced into the TDTW model, and the improved model based on reasonable assumptions solved the problem that the cavity length is too long and the calculation is huge when the finite difference method is used to numerically solve the propagation equation of spatiotemporal field dynamics in the cavity.Compared with other optical feedback models[23, 28], it does not need to assume the geometry of the laser cavity, but takes into account the QD optical susceptibility, distribution dynamics in the QD states, and spontaneous emission noise.Because the general expression of TDTW model with optical feedback is given, the proposed optical feedback model of QD MLLs can be extended to model other types of semiconductor lasers under optical feedback conditions.

Appendix

Derivation of the electric polarization expression Eq.(10)

The electric polarization expression is written as[24]

(A.1)

(A.2)

(A.3)

(A.4)