鄭歡歡 白魚秀 張雅瓊
摘 要: 構建基于無線傳感器網絡的煤礦智能監控系統能有效推進煤礦的智慧化建設,而礦井巷道無線傳感器網絡拓撲呈長距離帶狀,容易造成能耗不均、形成熱區的問題。提出改進LEACH協議形成適用于礦井巷道環境下的網絡路由協議:通過優化簇頭閾值選取和非均勻競爭半徑的簇頭篩選機制控制簇頭數目和位置,優化簇的劃分;在簇頭與sink節點進行路由選擇時,將剩余能量作為節點間權值計算的重要參數,從而減少能量較小節點轉發過路數據的概率,更好的均衡網絡節能能耗。實驗仿真結果表明,改進協議在存活節點個數和消耗總能量方面的性能優于LEACH和LEACH-C協議,有效均衡了網絡能量消耗,延長了網絡生命周期。
關鍵詞: 無線傳感器網絡; 非均勻分簇; 多跳路由
中圖分類號: TP393 ? ? ?文獻標志碼: A
Abstract: The intelligent monitoring system of coal mine based on wireless sensor network can effectively promote the intelligent construction of coal mine. The wireless sensor network topology of mine roadway is long-distance belt, it is easy to cause the problem of uneven energy consumption and hot area. In this paper, an improved LEACH protocol is proposed to form a network routing protocol to be suitable for mine tunnel environment. The number and location of cluster heads are controlled by optimizing the threshold selection of cluster heads and the screening mechanism of non-uniform competition radius, and the division of clusters is optimized. When routing between cluster heads and sink nodes is selected, the remaining energy is taken as an important parameter for the calculation of weights between nodes, so as to reduce the small amount of energy. The probability of transmitting the passing data by point can better balance the energy consumption of the network. The simulation results show that the performance of the improved protocol is better than that of LEACH and LEACH-C in terms of the number of surviving nodes and the total energy consumption.
Key words: wireless sensor network; uneven cluster; multi-hop routing
0 引言
無線傳感器網絡是由大量傳感器節點組成的具有有限信息感知、信息處理和信息傳遞的自組織網絡。由于傳感器節點體積小、成本低、計算能力強等優點,無線傳感器網絡廣泛應用于環境監視,醫療監測,軍事偵察、智慧礦山等領域。但是其傳感器節點依靠不能補充的電池作為能量來源,能耗的不均衡就會導致節點能量過快耗盡,影響網絡有效生存時間和網絡整體性能。為了解決能量均衡消耗問題,通過自適應分簇的LEACH協議[1]應運而生。此后,很多學者在此基礎上進行了更多的改進和優化。這些算法的基本思想主要是三大類:一類是通過加入不同的控制因子來改進簇頭的閾值計算[2-3],綜合多方面的因素完成簇頭的選擇;第二類是改變數據傳輸?shù)耐ㄐ怕窂絒4],第三類是通過不同的分簇方式達到均衡能耗的目的[5-6]。但是上述路由算法多適用于大面積監測區域,不適合應用于礦井的長距離帶狀區域[7]。為了解決這一特殊環境中容易造成的“熱區”問題以及匯聚節點的特殊位置,本文在LEACH協議簇頭的閾值選擇中綜合考慮節點剩余能量、到匯聚節點的距離和節點周圍的其他節點數目因素,采用非均勻分簇和簇間的多跳轉發策略,較好的均衡了無線傳感器網絡節點的能量,延長了網絡的生存周期。
1 LEACH協議概述
1.1 LEACH協議簡介
LEACH協議是一種經典的自適應分簇路由協議,可以在網絡中動態地根據閾值規則選擇簇頭節點,使每個節點具有一樣的被選概率,盡可能的平均能量消耗,延長網絡生存時間。
3 實驗仿真及分析
3.1 實驗環境
實驗使用Matlab對本文改進的協議進行仿真,并和LEACH,LEACH-C協議進行對比。實驗參數設置如表1所示。
3.2 實驗結果分析
三種算法在存活節點數目方面的比較,如圖1所示。
LEACH和LEACH-C在200輪附近的時候出現開始出現死亡節點,而本文的改進協議在接近300輪附近才出現死亡節點,而且每輪存活節點數目都要大于LEACH和LEACH-C中的存活節點數目。說明改進的協議能夠有效的均衡網絡節點的能量消耗,延長了網絡的生命周期。