亚洲免费av电影一区二区三区,日韩爱爱视频,51精品视频一区二区三区,91视频爱爱,日韩欧美在线播放视频,中文字幕少妇AV,亚洲电影中文字幕,久久久久亚洲av成人网址,久久综合视频网站,国产在线不卡免费播放

        ?

        A Fair Blind Signature Scheme to Revoke Malicious Vehicles in VANETs

        2019-02-22 07:33:00XiaoliangWangJianmingJiangShujingZhaoandLiangBai
        Computers Materials&Continua 2019年1期

        Xiaoliang Wang , Jianming Jiang , Shujing Zhao and Liang Bai

        Abstract: With the rapid development of IoT (Internet of Things), VANETs (Vehicular Ad-Hoc Networks) have become an attractive ad-hoc network that brings convenience into people’s lives. Vehicles can be informed of the position, direction, speed and other real-time information of nearby vehicles to avoid traffic jams and accidents. However,VANET environments could be dangerous in the absence of security protection. Because of the openness and self-organization of VANETs, there are plenty of malicious pathways. To guarantee vehicle security, the research aims to provide an effective VANET security mechanism that can track malicious vehicles as necessary. Therefore,this work focuses on malicious vehicles and proposes an anonymous authentication scheme in VANETs based on the fair blind signature to protect vehicle security.

        Keywords: VANETs, fair blind signature, trusted third-party, anonymous authentication.

        1 Introduction

        The rapid development of wireless communication technology has enabled mobile ad-hoc networks to be widely adopted in the ubiquitous Internet of Things, along with the rise of VANETs (Vehicular Ad-Hoc Networks).

        As the infrastructureless and decentralized nature of VANET, it is easy to suffer from various malicious attacks. The smart vehicles can be classified into cooperative or malicious ones with the help of machine learning techniques, such as support vector machine [Wahab, Mourad, Otrok et al. (2016)], extreme learning machine [Xiang, Zhao,Li et al. (2018)], etc. But, privacy-preserving is a challenge and the main threat that VANETs face is also the issue of privacy. The previous research of VANETs mainly focus on authentication [Calandriello, Papadimitratos, Hubaux et al. (2007); Han, Sang and Bae (2017); Lin, Sun, Ho et al. (2007); Oulhaci, Omar, Harzine et al. (2017); Tian and Qiang (2012)] defense against Sybil attacks [Feng, Li, Chen et al. (2017); Hussain and Oh (2014); Wu (2017); Zhang, Liang, Lu et al. (2014)] along with DDoS attack prevention [Biswas, Mi?i? and Misic (2012); Hamieh, Ben-Otheman and Mokedad(2009); Hussein, Elhajj, Chehab et al. (2017)]. In 2011, hackers successfully invaded a vehicle through Bluetooth and wireless network technology. In July 2013, a company engineer successfully caused a vehicle brake failure by controlling its speed and making the engine stop. In March 2014, a security consultant put forward inherent password security vulnerabilities in the 2014 Black Hat ASIA conference in Singapore, which would lead to the leaking of the personal information of the driver. Additionally, on February 9, 2015, Massachusetts Senator Ed Markey published a report about risks of VANETs, which disclosed although more and more vehicle manufacturers wanted to apply wireless sensor devices and applications in vehicles, they would be unable to prevent hackers from impairing vehicular security [Markey (2015)].

        In VANETs, there are two main communication types: V2V (Vehicle to Vehicle) and V2I (Vehicle to Infrastructure). Hartong et al. [Hartong, Goel and Wijesekera (2007)]proposed an algorithm that was based on the geographic location concept [Denning and Macdoran (1996)], which used the vehicle location, the speed and travelling time information as factors to protect the communication of V2I. In 2008, Zhang et al. [Zhang,Lu, Ho et al. (2008)] presented a pseudonym application based on blind signature technology for vehicles between two Remote Sensing Utilities (RSUs), which can prevent infrastructure from peeking into the trails of vehicles, but unable to revoke a malicious vehicle. Feng [Feng (2010)] used Combined Public Key (CPK) and blind signature to propose a pseudonym generation scheme to satisfy security and privacy requirements, which is more efficient in computation and communication cost. Proxy Blind Signature Scheme (PBSS) [Tian and Qiang (2012)] proposed a signature scheme based on blind signature and proxy multi-signature certification technology, which solved authentication problems between the nodes. The use of two signature technologies realized onboard interactivity authentication and improved communication safety.Experimental results show PBSS can meet the on-board node mobility and complexity, as well as the authentication efficiency and offering good performance.

        However, these articles do not provide traceability capability for VANETs, especially when a vehicle abuses the blind signature. Essentially, the malicious vehicle can abuse the anonymity of the blind signature to commit an array of fraudulent behaviors. The question is how to constrain abusive behaviors in reality? It was never addressed in the abovementioned articles.

        This work proposes a lightweight anonymous authentication scheme, which can be used to track anonymity abuse in VANETs. Comparing with previous anonymous authentication schemes in VANETs, the proposal is the only one that can achieve privacy protection,authentication and traceability.

        2 Overview of fair blind signature

        Conventional blind signature is that the signers of the document never know what they have signed, which may cause blind abuse. Some malicious users will use the feature of the blind mechanism to cheat the signer to sign unwilling contents. As opposed to blind signature, fair blind signature [Stadler, Piveteau and Camenisch (1995)] adds a trusted third party to avoid this phenomenon because the trusted third party is able to supervise the signing process. Upon finding the signed contents are tampered with, it can track the malicious user in a timely fashion. Compared to blind signature mechanism, the revocable anonymity is brought into the Fair blind signature mechanism, in which the authority can link an issuing session to the resulting signature and track a signature to the user who possesses it.

        3 System architecture

        Fig. 1 illustrates a communication scenario and mode between the vehicles, Trust Managers(TMs) and RSUs. Communication mode includes communication amongst the vehicles and between vehicles and infrastructures. In this figure, it mainly introduces the communication between the vehicles, infrastructure, TMs and information transmission mode.

        Figure 1: VANET communication model

        Fig. 2 shows the communication relationship between vehicles and Trust Manager (TM),along with the RSU in the VANET. In our scheme, before a vehicle engages into daily traffic, it must register at the TM. In this process, firstly the vehicle signs the message using its own identity information, and then sends it to the nearby TM. The process generates the parameters of the signature process, transmission information and the signature algorithm. After the TM receives this information, it will verify whether the information is from the authentic vehicle.

        Then the TM uses the same signature algorithm to sign information, and then sends it back to the vehicle. After the vehicle receives the returning information, it will check whether these messages have changed or not. If not, it will send this signature to the RSU,which the vehicle will keep for future use. The RSU then starts its verification if there is the true signature of TM, it will complete the blind signing, and transmit the final signature to the vehicle.

        Figure 2: VANET architecture

        Tab. 1 describes the meaning of the main symbolic parameters used in the communication process:

        Table 1: Parameter table

        4 Signing model

        A transportation management department allocates different symbolic parametersto every region, which represents local identification information. These parameters are embedded in the OBUs of vehicles. Every vehicle in the region is denotedThe public key of vehicles in the region are disclosed during running.

        As per the above introduction, before vehicles connect with the RSU they must have a registration process, so that they can use signatures from a local TM to represent their identities to connect with the RSU. The registration process includes the two steps:

        1. The vehicle will sign its own privacy information and send it to the local TM. Then the TM verifies and registers it. If successful, TM will sign the information and return it to the vehicle;

        2. After the vehicle has received the TM’s signature, it will check whether the signature is tampered with or not. If the information has not been tampered, the vehicle will use the TMs’ signatures as its identity certificate to communicate with RSUs anonymously. In addition, the TM also distributes a different electronic license to each vehicle.

        4.1 System initialization phase

        Use a set R to denote these RSUs in the region

        Figure 3: Key generation

        Figure 4: Initialization phase

        4.2 Registration at TM of vehicles

        In this process, the TM gives each vehicle a valid license before driving on-road and storing related information about the vehicle. Then the vehicle will sign its own information and send it to the local TM for registration. Assume the vehicle is denoted as Vi:

        1. Vi randomly selects a number r, 1

        2. After the TM has received the above information, it calculatesand then according to the ID provided by Vi, it finds the corresponding user signature algorithm DSA( ) for next verification. If M’=m, the TM records some information of the vehicle, such as r, m and M. Finally, TM adopts the same signature algorithm DSA( ) to sign them, and returns (m, DSA (m)) to the vehicle Vi.

        3. After vehicle Vi has received (m, DSA (m)) from TM, it will verify whether its information has been modified or not. If the information has not been tampered with, the vehicle Vi sends (m, DSA (m)) to a certain RSU, which Vi will communicate in future.

        Figure 5: Registration Phase

        Figure 6: Validation phase

        Figure 7: OBU Validation phase

        4.3 Signing

        1. When the roadside infrastructure R receives (m, DSA (m)), it will be verified. If successful, R signs it and calculatesthen returns the signature to vehicle Vi as well as storing the signature and (m, DSA (m)).

        Figure 8: Blind signature

        Figure 9: RSU validation phase

        4.4 Verification

        The verification process begins by processing the blind factor γ to obtain the inverse of γ,then according to the blind factor γ to restore the message S. Next, the public key e is used to verify the signature. Finally,is calculated to verify whether the information has been tampered or altered by an external party.

        Figure 10: Verification process

        Figure 11: OBU Validation phase

        5 Proof and security analysis

        1. The vehicle Vi uses the secure hash function to make the message M anonymous. It calculates M and makes the message M blind. Because the message M is blinded, but carries the signature of Vi, this process makes other vehicles unable to impersonate the identity of Vi to cheat the TM. The difficulty of faking Vi is equal to attacking the DSA( ) algorithm.

        2. The vehicle manager TM can only register the message M sent by vehicle Vi, but not modify it. Otherwise it will fail to pass the verification of Vi. If the TM wants to modify the message M, it must find a random parameter to meet the verification equation of M, which is equivalent to attacking the RSA algorithm.

        3. The information that vehicle Vi sends to the infrastructure R is verified by TM, so it cannot be arbitrarily modified by Vi. The difficulty of vehicle Vi tampering the message is equal to the difficulty of breaking the DSA( ) algorithm.

        4. Once the infrastructure R finds the transmitted message is incorrect, it can track the real vehicle with the help of the TM.

        6 Analysis of experimental results

        In order to verify the validity of the scheme, the simulation experiment was carried out.C++ language is used to develop experiments on a Microsoft Windows 7 system with a 2.6 Ghz Intel Core i5 processor and 4 GB memory. The experimental data set is generated by the algorithm of Thomas Brink [Brinkhoff (2002)] and widely recognized by the mobile data management industry. Oldenburg mobile network (5*5km) is used as the input to generate mobile data sets and communication node objects.

        According to the VANET security standard of IEEE 1609.2 [IEEE Standard (2006)], the definition of message format is described in Tab. 2.

        Table 2: Message format for vehicle

        In Tab. 2, MID is message identifier defining the different message types in the scheme.MData carries valid data for the message including the relevant information of the vehicle, such as vehicle speed, location, direction and so on. TS is timestamp recording the time of message generation to prevent invalid packets and replay attacks. Sign is the blind signature. TTL is the survival time that is used to terminate the transmission of messages to prevent the flooding of messages.

        Consider the use of a blind signature in a communication cycle. If all messages are carried with this blind signature, the communication cost is huge. If only the previous single messages have blind signatures and the later messages no longer contain the blind signatures, the success rate of message authentication is low. Therefore, we want to find that how many messages containing this blind signature are suitable. It is assumed that the number of messages in a communication cycle is y and z is the number of messages containing blind signatures. Using the receiving ratio model of data packet provided in the literature [Calandriello, Papadimitratos, Hubaux et al. (2007)],message transmission distancemessage receiving rate. The success rate of message authentication is defined asFig. 12 shows the impact of the message transmission distance to the receiving rate. As transmission distance increases, the success rate of messages decreases.

        Figure 12: Impact of distance

        Fig. 13 depicts the relationship between the number of messages of a blind signature Z,message transmission distanceand the success receiving rate of messagesWith the decrease of distance, the message receiving rate is improved. Whenis fixed,the success receiving rate of messages increases correspondingly with the increase of the number of messages containing a blind signature. It can be seen from the figure that whenthe success receiving rate of messages is greater than 90%. Therefore, we take the number of messages contain a blind signature z=4. Under this condition, system is able to meet the verification requirements of most of the vehicle authentications.

        Tab. 3 compares our scheme with the PBSS [Tian and Qiang (2012)] in anonymity,authentication and trace-ability. PBSS adopts the distributed proxy blind signature, which can avoid forgery attacks and meet authentication security, but not considering privacy protection and traceback of anonymous abusers.

        Figure 13: Success authentication for different

        Table 3: Scheme feature comparison

        7 Conclusions

        In this paper, an anonymous authentication scheme based on the fair blind signature is proposed for communication between vehicles and RSU in VANETs, along with the relative merits of the scheme against alternative communication approaches. A simulation experiment was then conducted to assess the merits of the Fair blind signature scheme, which includes an evaluation of the success receiving rate of messages. From the security analysis and experimental results, the proposed scheme is proven to possess anonymity, traceability and authentication functionalities. In the future, it should be an interesting issue to transmit the signature by steganography [Zhang, Qin, Zhang et al.(2018)] because of its excellent imperceptible in human sense system and statistic [Yang,Luo, Lu et al. (2018)].

        Acknowledgments:This project is supported by Internet innovation and open platform base of the education Ministry of China (No. KJRP1401), the cooperative education project of the education Ministry of China (No. 201702113002), US-China Computer Science Research Centre of Nanjing University of Information Science and Technology (No.KJR16059), Hunan Natural Science Foundation (No. 2018JJ2138), Education Department of Hunan Province (No. 17B096).

        国产一区二区三区国产精品| 日本不卡视频一区二区三区| 福利视频一区二区三区| 亚洲人不卡另类日韩精品| 亚洲日韩小电影在线观看| 久久久天堂国产精品女人| 亚洲最大在线精品| 国产成人永久在线播放| 天堂av在线一区二区| 护士人妻hd中文字幕| 亚洲精品tv久久久久久久久久| 国产精品无码午夜福利| 亚洲毛片在线播放| 国产欧美久久久精品影院| 亚洲综合天堂av网站在线观看 | 精品中文字幕精品中文字幕 | 国产精品亚洲专区无码不卡| 六月婷婷久香在线视频| 高潮毛片无遮挡高清免费| 国产91在线|亚洲| 国产亚洲一本二本三道| 特黄熟妇丰满人妻无码| 亚洲av无码成人精品区天堂 | 欧美精品无码一区二区三区| 亚洲综合无码无在线观看| 欧美亚洲韩国国产综合五月天| 成人全部免费的a毛片在线看| 国产熟妇疯狂4p交在线播放| 国产二级一片内射视频插放| 在线播放国产女同闺蜜| 国产一区二区三区av观看| 欧美做受又硬又粗又大视频| 精品一区二区三区在线观看| 亚洲欧洲日韩免费无码h| 国产精品玖玖资源站大全| 女同在线视频一区二区| 亚洲精品电影院| 国产精品久久无码一区二区三区网| 国产精品亚洲一区二区极品| 喷水白浆视频在线观看| 天美传媒一区二区|