2018年6期
刊物介紹
本學報1988年創刊，中國航空學會主辦，原為中文版《航空學報》選刊，1996年開始改為直接從來稿中錄用文章，兩刊不再重復。主要欄目有空氣動力學、飛行力學、自動控制、航空電子、發動機、材料、制造工藝及飛行器設計等。
CHINESE JOURNAL OF AERONAUTICS
Fluid Mechanics and Flight Mechanics
- An efficient aerodynamic shape optimization of blended wing body UAV using multi- fidelity models
- Effect of multiple rings on side force over an ogive-cylinder body at subsonic speed
- Dynamic temperature prediction of electronic equipment under high altitude long endurance conditions
- Experimental investigation on static/dynamic characteristics of a fast-response pressure sensitive paint
- Takagi-Sugeno fuzzy model identification for turbofan aero-engines with guaranteed stability
- Experimental study on film cooling performance of imperfect holes
- Mechanism of stall and surge in a centrifugal compressor with a variable vaned diffuser
- Dynamic modeling and simulation of a pressurized system used in flight vehicle
- Numerical investigation of pyrolysis effects on heat transfer characteristics and flow resistance of n-decane under supercritical pressure
Solid Mechanics and Vehicle Conceptual Design
Electronics and Electrical Engineering and Control
- Digital fixed-frequency hysteresis current control of a BLDC motor applied for aerospace electrically powered actuators
- Robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft with actuator saturation
- A joint mid-course and terminal course cooperative guidance law for multi-missile salvo attack
- An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets
- Attitude control without angular velocity measurement for flexible satellites
- Satellite proximate interception vector guidance based on differential games
- An improved numerical method for constructing Halo/Lissajous orbits in a full solar system model
Material Engineering and Mechanical Manufacturing
- A multi-order method for predicting stability of a multi-delay milling system considering helix angle and run-out effects
- Testing and evaluation for fatigue crack propagation of Ti-6Al-4V/ELI and 7050-T7452 alloys at high temperatures
- Influences of milling and grinding on machined surface roughness and fatigue behavior of GH4169 superalloy workpieces