2021年1期
刊物介紹
The Chinese Journal of Chemical Engineering (Bimonthly, started in 1982) is the official journal of the Chemical Industry and Engineering Society of China and published by the Chemical Industry Press. The aim of the journal is to develop the international exchange of scientific and technical information in the field of chemical engineering. It publishes original research papers that cover the major advancements and achievements in chemical engineering in China as well as some articles from overseas contributors. The topics of journal include chemical engineering, chemical technology, biochemical engineering, energy and environmental engineering and other relevant fields. Papers are published on the basis of their relevance to theoretical research, practical application or potential uses in the industry as Research Papers, Research Notes, Chemical Engineering Data and Reviews. Prominent domestic and overseas chemical experts and scholars have been invited to form an International Advisory Board and the Editorial Committee. It enjoys recognition among Chinese academia and industry as a reliable source of information of what is going on in chemical engineering research, both domestic and abroad.
Chinese Journal of Chemical Engineering
- Perspectives and challenges of hydrogen storage in solid-state hydrides
- Wet flue gas desulfurization performance of 330 MW coal-fired power unit based on computational fluid dynamics region identification of flow pattern and transfer process
- EMMS-based modeling of gas–solid generalized fluidization:Towards a unified phase diagram
- Using expansion units to improve CO2 absorption for natural gas purification-A study on the hydrodynamics and mass transfer
- Simulation and experimental study on the surface morphology and energy lost of the target material under non-overlapping impact of angular particles
- Numerical optimization for blades of Intermig impeller in solid–liquid stirred tank
- Dynamic control analysis of interconnected pressure-swing distillation process with and without heat integration for separating azeotrope
- The development of Fructus corni quality standard considering the effects of processing
- Spray coating of polysulfone/poly(ethylene glycol)block polymer on macroporous substrates followed by selective swelling for composite ultrafiltration membranes
- Unravel the potential of zinc oxide nanoparticle-carbonized sawdust matrix for removal of lead(II)ions from aqueous solution
- Preparation of hybridizing zeolitic imidazolate frameworks with carboxymethylcellulose for adsorption separation of n-hexane/3-methylpentane
- Design and synthesis of Al-MOF/PPSU mixed matrix membrane with pollution resistance
- Implications from γ-globulin adsorption onto cation exchangers fabricated by sequential alginate grafting and sulfonation
- A further study of the kinetics and optimization of the essential oil hydrodistillation from lavender flowers
- Desorption of Cl?from Mg-Al layered double hydroxide intercalated with Cl?using CO2 gas and water
- The performance of activated carbon/NiFe2 O4 magnetic composite to retain heavy metal ions from aqueous solution
- Multivariate optimization of high removal of lead(II)using an efficient synthesized Ni-based metal–organic framework adsorbent
- Growth process and short chain alcohol separation performance of fluoride-containing NaY zeolite membrane
- Enhancement of CO2 capture and microstructure evolution of the spent calcium-based sorbent by the self-reactivation process
- Efficient elimination and detection of phenolic compounds in juice usinglaccase mimicking nanozymes
- Density functional theory and kinetic Monte Carlo simulation study the strong metal–support interaction of dry reforming of methane reaction over Ni based catalysts
- Kinetic study for the oxidation of cyclohexanol and cyclohexanone with nitric acid to adipic acid
- Catalytic oxidation of low concentration formaldehyde over Pt/TiO2 catalyst
- High nitrogen carbon material with rich defects as a highly efficient metal-free catalyst for excellent catalytic performance of acetylene hydrochlorination
- Photochemical microfluidic synthesis of vitamin D3 by improved light sources with photoluminescent substrates
- Upgrading Siberian(Russia)crude oil by hydrodesulfurization:Kinetic parameter estimation in a trickle-bed reactor
- Homogeneous Co3 O4 film electrode with enhanced oxygen evolution electrocatalysis via surface reduction
- Numerical study on effects of the cofferdam area in liquefied natural gas storage tank on the leakage and diffusion characteristics of natural gas
- Optimization and mechanisms analysis of indigo dye removal using continuous electrocoagulation
- Improved process monitoring using the CUSUM and EWMA-based multiscale PCA fault detection framework
- Enhanced temperature difference control of distillation columns based on the averaged absolute variation magnitude
- Interaction of tetradecyltrimethylammonium bromide with bovine serum albumin in different compositions:Effect of temperatures and electrolytes/urea
- Designing and optimizing a parallel neural network model for predicting the solubility of diosgenin in n-alkanols
- Displacement of shale gas confined in illite shale by flue gas:A molecular simulation study
- Preface to virtual special issue of biocatalysis
- Asymmetric bioreduction of γ-and δ-keto acids by native carbonyl reductases from Saccharomyces cerevisiae
- Immobilization of trophic anaerobic acetogen for semi-continuous syngas fermentation
- An enzyme-loaded reactor using metal-organic framework-templated polydopamine microcapsule
- Simulation study on the gasification process of Ningdong coal with iron-based oxygen carrier
- Chemical looping gasification of sewage sludge using copper slag modified by NiO as an oxygen carrier
- Study of sodium lignosulfonate prepare low-rank coal-water slurry:Experiments and simulations
- Design and analysis of dual mixed refrigerant processes for high-ethane content natural gas liquefaction
- Experimental and modeling study of the kinetics of methane hydrate formation and dissociation
- Pyrolysis of single large biomass particle:Simulation and experiments
- A polypropylene melt-blown strategy for the facile and efficient membrane separation of oil–water mixtures
- Application of an immobilized microbial consortium for the treatment of pharmaceutical wastewater:Batch-wise and continuous studies
- Engineering practice and economic analysis of ozone oxidation wet denitrification technology
- An efficient preparation of porous polymeric microspheres by solvent evaporation in foam phase
- Preparation and properties of a low-cost porous ceramic support from low-grade palygorskite clay and silicon-carbide with vanadium pentoxide additives
- Highly interconnected macroporous MBG/PLGA scaffolds with enhanced mechanical and biological properties via green foaming strategy
- List of Reviewers (2020.1.1— 2020.12.31)